Bedienungsanleitung Boneco 2055D (Seite 24 von 137) (Englisch, Holländisch, Dänisch, Französisch, Italienisch, Schwedisch, Norwegisch, Finnisch)

497112

Zoom out

Zoom in

Vorherige Seite

1/137

Nächste Seite

Cleaning/maintenance

Switch the appliance off and remove the power

plug from the mains socket before you clean the

appliance (26).

• Regular cleaning is a precondition for hygienic, trouble-

free operation.

• The appliance can be disassembled for cleaning in a

few moves.

• Never submerse the entire unit in water (28).

• The unit must be completely emptied and cleaned, if

it has been filled with water for longer than a week

without being used.

Recommended cleaning intervals

The recommended cleaning intervals depend on the air and

water quality, as well as operating times. A thin film of lime

scale on the disks actually increases the humidity output!

• once to twice a year: upper part of housing and fan

• every 2 weeks: water tank and base

• every 4 weeks: humidifying disks

Cleaning the upper part of the housing

Remove the upper part of the unit (30) and wipe out tho-

roughly once to twice a year with a damp cleaning cloth

(31).

Cleaning the fan

The cover can be removed from the upper part of the unit

(32). Under this cover is the fan (33), which can be cleaned

with a damp cleaning cloth as required.

to show the current value (CURRENT) (E). Upon reaching

the desired relative humidity, the unit automatically swit-

ches off (display shows DESIRED and CURRENT) (E). If the

desired relative humidity falls, the appliance automatically

switches on again.

Quick display of current relative humidity

When the unit is switched off (mains cable is connected,

rotary switch to OFF setting), the current relative humidity

can be shown in the display by briefly pressing one of the

B buttons. This display automatically goes out after a few

seconds.

C) Change Ionic Silver Stick

The letter C in the display indicates that the Ionic Silver

Stick

(ISS) must be changed. The symbol remains visible

until both B buttons are pressed and held down for approx.

5 seconds.

D) Cleaning the appliance

The letter D in the display indicates that the appliance must

be cleaned. The letter remains visible until both B buttons

are pressed and held down for approx. 5 seconds.

E) Current/Desired Display

If DESIRED appears on the display, the value in % next to it

signifies the desired relative humidity, i.e. the desired value

is shown. If the display shows CURRENT, then the current

relative humidity is shown.

F) Automatic switch-off

“Tank empty”

The water quantity is easy to see thanks to the transparent

water tank. The display on the appliance also shows when

the unit should be refilled with water. If the water level falls

below the minimum quantity, the appliance automatically

switches off. A red blinking symbol (F) appears on the

display. When water is added, symbol F goes out and the

appliance continues operating.

Warning: When lifting the upper part off the base, the ap-

pliance also switches off. In this case, the red blinking F

symbol will also appear on the display. Only when the upper

part is replaced on the base does symbol F go out and the

appliance continues operating.

03-2055-2055D-EU-Manual-EN.indd 24 18.7.2006 18:04:06 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Boneco 2055D Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Boneco 2055D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info