Bedienungsanleitung BonFeu BonTino (Seite 5 von 12) (Deutsch, Englisch, Holländisch, Französisch)

759239

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Please read these instructions carefully before starting assembly. We suggest you carry out the assembly on a soft surface

like a carpet, so as to avoid scratching the paint. Please note because of the nature of cast metal, you may ﬁnd roughness on

the surface which enhances the beauty of the product and is not a defect.

• Do not discard any of packaging until you have checked that

you have all parts and pack of ﬁttings.

• Keep children away during assembly. This item contains small

parts which can be swallowed by children.

• Retain the assembly instructions for future reference.

ASSEMBLY INSTRUCTIONS UK

OUTDOOR CHIMENEA & FIRE PIT USER GUIDE

Users should exercise care and caution when using this product.

This product is for outdoor use and will become very hot during use.

BEFORE SETTING UP

This product should only be used outdoors. If setting up on a patio, the area should be cleared, and the roof should be open

so any smoke emissions can escape easily. Set up on a ﬂat surface, away from anything that could pose a ﬁre threat. As this

item is low to the ground, always keep an eye on the ﬁre.

WARNING

1. DO NOT use if you suffer from heart and lung conditions because smoke inhalation may exacerbate existing conditions.

2. DO NOT move the product after it is alight.

3. DO NOT sit too close to the product.

4. DO NOT overﬁll the ﬁre pit during use.

5. DO NOT use accelerants to light the ﬁre.

6. DO NOT use in inclement weather.

7. Keep ﬂammable liquids well away from the product as some ﬂammable liquids can catch ﬁre from the emitting heat.

8. Only handle the product with the poker. Once lit, do not touch the lid with bare hands or oven mitts.

Only use the poker to lift the lid if you have to.

9. Keep a considerable distance away from the product. Keep kids and pets away from the product.

10. Adults should set up and maintain product.

11. Keep the set up area clear from any combustible materials.Dry leaves, paper, dry grass or pine needles can catch ﬁre

easily from the embers that come out of the product.

12. Once lit, approach the product with caution to avoid slipping and falling into it.

ASSEMBLY INSTRUCTIONS

Tool required: Screwdriver (X) and Poker (Z) provided in package.

DO NOT FULLY TIGHTEN THE BOLTS BEFORE ASSEMBLING

ALL OF THE PARTS.

1. Attach Legs (F) to Stove (D) with bolt (T). Tighten the bolts.

2. Attach Chimney Connector (H) to back of Stove (D) with bolt (T),

Rings (U) and Nuts (V). Tighten the bolts.

3. Attach Chimney (G) to Chimney connector (H).

4. Attach Mesh door (I) to Body (D).

5. Put chromed BBQ grill (B) to top of body (D).

6. Put Wokring (C) onto top of body (D).

7. Put Middle plate (E) into body (D).

Parts Quantity

A Top plate 1

B Chromed BBQ grill 1

C Wokring 1

D Stove 1

E Middle plate 1

F Leg 3

G Chimney 1

H Chimney connector 1

I Mesh door 1

T Bolt 7

U Ring 7

V Nut 4

X Screwdriver 1

ZPoker 1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BonFeu BonTino Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info