Bedienungsanleitung Bora BFIA (Seite 18 von 48) (Englisch)

714527

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Device description

www.bora.com

 Perform a magnet test, if necessary. If a magnet sticks

to the base of the utensils, they are normally induction

compatible.

 Pay attention to the cookware bottom. The base of

the cookware should not show any sign of curvature.

Due to incorrect temperature monitoring of the hob

caused by the air gap between the cookware and the

temperature sensor underneath the hob, overheating

may occur. The bottom of the cookware must not have

any sharp grooves or sharp edges to avoid scratching

the cooktop.

 Place the cookware (without a mat or similar) directly

onto the glass ceramic.

Noises

The following noises may occur in the cookware when

using induction cooking zones, depending on the material

and the finish of the base:



Humming may occur when using a high power level. It

decreases or disappears if the power level is decreased.



Crackling or whistling may occur due to the bases of

cookware made of different materials (e.g. sandwich

base).



Clicking sounds may occur during electronic switching

procedures especially at low power levels.



Whirring may occur when the cooling fan is switched

on. In order to increase the service life of the

electronic system, the cooktop is equipped with a

cooling fan. The cooling fan switches on automatically

if the cooktop is used intensively. You will hear a

whirring sound. The cooling fan may continue running

after the device has been switched off.

5.4 Functional principle of the

cooktop extractor

5.4.1 Freely adjustable power control

The power levels are controlled using the central setting

field on the operating panel.

5.4.2 Automatic cooktop extractor function

The automatic cooktop extractor function adjusts the

extraction performance (power level) to the highest

cooking zone cooking level used.

Function Power levels

Extractor level 4 4 4 4 5 6 7 8 9 P

Cooking level 1 2 3 4 5 6 7 8 9 P

Tab. 5.6 Extraction performance and cooking level



If the power level of the cooking zones is changed,

the automatic cooktop extractor function adjusts the

cooktop extractor performance after a 30 second

delay.



Once the cooking session is complete, the automatic

after-run is activated.

5.3.5 Bridging function

The two side cooking zones can be operated as a

connected cooking zone at the same power level.



The display shows

The bridging function is suitable for heating food in a

roaster.

5.3.6 Pause function

The cooking session can be temporarily interrupted.



I I

appears in the display.



The cooking session and set timer are interrupted

while the pause function is active.



The pause function is limited to a maximum duration of

10 minutes.

5.3.7 Timer functions

You can use 2 timer functions:



Short-time timer (egg timer), no automatic switching

off of a cooking zone.



Automatic cut-off for automatically switching off a

cooking zone.

5.3.8 Pan size recognition

The cooking zone does not work



is shown in the display;



if it is switched on without cookware or with

unsuitable cookware;



if the base diameter of the cookware is too small;



if the cookware is removed from a switched on

cooking zone.



After 10 minutes have passed without a pan being

detected, the cooking zone will switch off automatically.

5.3.9 Suitable cookware

INFO The heating and heat through time for the base

of the cookware as well as the cooking results

are significantly influenced by the structure and

material of the cookware.

Cookware with this symbol is suitable for

induction cooktops.

The cookware used for the induction cooktop

must be made of metal, feature magnetic

properties and possess a sufficient bottom

surface.

Suitable cookware is made of:



stainless steel with a magnetisable base



enamelled steel



cast iron

Cooking zone Minimum diameter

Front 120 mm

Back 120 mm

Tab. 5.5 Minimum cookware diameter

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bora BFIA Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bora BFIA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info