Bedienungsanleitung Bora BHA (Seite 35 von 44) (Englisch)

714524

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Cleaning and maintenance

www.bora.com

8.4.2 Cleaning the air inlet nozzle and

stainless steel grease filter

INFO Clean the stainless steel surfaces in the polishing

direction only.

INFO If the stainless steel grease filter can no longer be

cleaned completely, this means the stainless steel

grease filter will need to be replaced.

Manual cleaning

 Use a degreasing cleaning agent.

 Rinse the inlet nozzle and stainless steel grease filter

with hot water.

 Use a soft brush to clean the inlet nozzle and stainless

steel grease filter.

 After cleaning, rinse the inlet nozzle and stainless steel

grease filter well.

Cleaning in the dishwasher

 Rinse the air inlet nozzle and the stainless steel grease

filter with a rinsing program at a maximum of 65 °C.

8.4.3 Installing stainless steel grease filter

and air inlet nozzle

 Grab the stainless steel grease filter using the handle [2]

(Fig. 7.2)

 Insert the stainless steel grease filter [1] into the

suction opening.

 Make sure that the stainless steel grease filter rests

against the bottom housing base. A lock is not needed

and is not provided.

 Reach into the access opening [2] of the inlet nozzle

with your hand (Fig. 7.1).

 Insert the air inlet nozzle (Fig. 7.1; [1]) centrally into

the suction opening.

 Press the air inlet nozzle upwards until it engages.

8.5 Cleaning the air guiding housing

Greasy deposits and limescale residues from the cooking

vapour can accumulate on the surface of the air guiding

housing. Regular, thorough cleaning (see Table 7.1) is

thus necessary.

The air guiding housing is on the underside of the cooktop

in the floor unit.

8.5.1 Opening the air guiding housing

 Make sure that the cooktop and cooktop extractor are

switched off (see Operating chapter).

 Wait until the fan display is

8.4 Cleaning the cooktop extractor

The air inlet nozzle and the stainless steel grease filter

absorb the greasy components of the kitchen vapour.

 Make sure that the cooktop and cooktop extractor are

switched off (see Operating chapter).

 Wait until the fan display is 0.

 Clean the cooktop extractor in accordance with the

cleaning cycles (see Tab. 7.1).

 Clean the surfaces of the exhaust air system using a

soft damp cloth, detergent or a mild window cleaning

agent.

 Soften dried-on dirt residues using a damp cloth

(do not scratch!).

8.4.1 Removing the air inlet nozzle and

stainless steel grease filter

Fig. 8.1 Removing the air inlet nozzle

[1] Air inlet nozzle

[2] Access opening

Prerequisite: The fan level indicator indicates

 Reach into the access opening [2] with your hand.

 Remove the air inlet nozzle [1] out upwards.

Fig. 8.2 Removing the stainless steel grease lter

[1] Stainless steel grease filter

[2] Handle

[3] Suction opening

 Grab the stainless steel grease filter using the

handle [2].

 Pull the stainless steel grease filter [1] out of the

suction opening [3] upwards.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bora BHA Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bora BHA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info