714396
20
Zoom out
Zoom in
Vorherige Seite
1/32
Nächste Seite
EN
20
Gas installation
www.bora.com
6.2.1 Additional installation notes for
Australia and New Zealand (AUS/NZS)
INFO Observe the requirements on the installation
of the appliance pursuant to AS/NZS 5601:
minimum clearance of the gas burner head from
flammable surfaces.
Please note all previous information in this section.
In addition, adhere to the requirements of the
currently applicable version of the regulations:
NZS5261/AS5601/AG601.
6.2.2 Gas connection AUS/NZS
Further technical requirements are considered:
AS/NZS 5263.1.1 2016 - Domestic Gas Cooking
Appliances.
Check the extended scope of delivery
Name Quantity
Gas regulator 1,00 kPa with test point for natural gas (NG)
1
Test point adapter for liquid gas (LPG) 1
Tab. 6.1 Extended scope of delivery for AUS/NSZ
Create the gas connection
The connection to a rigid and bend-resistant pipe must
be established as specified in AS/NZS 5601.
Pursuant to AS/NZS 1869 (AGA-certified and authorised)
and AS/NZS 5601, the connection to a safety hose
for gas must have a diameter of 10 mm, a class B or D
classification and a maximum length of 1200 mm.
Connect the appliance as follows:
Switch off the main switch/automatic circuit breaker
before connecting the cooktop.
Protect the main switch/automatic circuit breaker
from being switched on without permission.
Make sure the device is not energised.
Check the gas type and gas pressure of the gas supply
pipe.
Ensure that the appliance is equipped with the correct
nozzle type in order to guarantee a correct burner
flame and safe operation.
Connect the appliance as follows:
Set the control knob to the 0 position.
Close the gas supply.
Switch off the main switch/automatic circuit breaker
before connecting the cooktop.
Protect the main switch/automatic circuit breaker
from being switched on without permission.
Make sure the device is not energised.
Check the gas type and gas pressure of the gas supply
pipe.
Ensure that the appliance is equipped with the correct
nozzle type in order to guarantee a correct burner
flame and safe operation.
Remove the protective cap from the connection tube.
Use a security gas socket to connect this directly
to the connection bracket of the gas cooktop in a gas-
tight manner using a permitted security bracket.
If using a connection bracket, screw this on securely
with the attached seal.
ISO 228-1
ISO 7-1
(EN10226)
ISO 228-1
ISO 228-1
Tab. 6.2 Connection bracket
Only use the type of connection bracket permitted in
your country.
ISO 228-1/ISO7-1(EN10226): cylindrical/conical
ISO 228-1/ISO 228-1: cylindrical/cylindrical
Connect the appliance to the gas supply pipe.
Tighten all connections so that they are secure.
Check that installation has been done correctly.
Check the correct functioning of the stopcock.
Check the tightness of the gas connection by
conducting a leak test (see Leak test section).
Switch on the main switch/automatic circuit breaker.
Put the cooktop into operation (see the Operation
chapter).
Check all the functions and the burner flame are
working correctly.
20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bora CG11 Classic wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Bora CG11 Classic

Bora CG11 Classic Bedienungsanleitung - Deutsch - 32 seiten

Bora CG11 Classic Bedienungsanleitung - Holländisch - 32 seiten

Bora CG11 Classic Bedienungsanleitung - Französisch - 32 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info