Bedienungsanleitung Bora CKCH (Seite 18 von 64) (Englisch)

714391

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Appliance description

www.bora.com

4.2.3 Overview of features and functions

Features CKA2

Automatic fan detection



Electronic power adjustment



Interface communication



Compact grease filter unit



Functions

Automatic after-run



Power setting



Automatic extractor function



Filter service indicator (recirculation mode)



Safety devices

Control lock



Safety shut-down



active error monitoring



Tab. 4.7 Overview of features and functions

4.2.4 Structure

Cooktop extractor CKA2

Fig. 4.5 BORA Classic cooktop extractor CKA2

[1] Air inlet nozzle

[2] Grease filter unit

[3] Cooktop extractor

[4] Control unit

4.2.5 Cooktop extractor functions

Power control

The power levels are adjusted via the operating panel

by tapping or swiping movements on the touch slider.

Alternatively the power levels can also be set using the

touch buttons and above and below the touch

slider.

Extractor power setting

When the power setting is activated, maximum extractor

power is available for a predefined time.

This power setting makes it possible to suction away high

levels of cooking vapours more quickly. After 10 minutes,

the power setting is automatically switched to power level

Automatic extractor control

The extractor power level automatically adjusts itself

depending on the current cooktop settings. No manual

adjustment of the fan controls is necessary but it is

possible. The extractor power is automatically adjusted to

the highest power level used on all cooking zones that are

currently in use.

Function Power levels

Cooking level 1 2 3 4 5 6 7 8 9 P

Extractor power 3 3 3 4 4 4 5 5 5 P

Tab. 4.8 Extraction performance and cooking level



A change in the power level of a cooking zone results

in automatic adjustment of the extractor power after

a delay of 20 seconds on induction cooktops and 30

seconds on all other cooktops.

Automatic after-run

The cooktop extractor continues to run at a lower level

and switches off automatically after a defined time.

The duration of the after-run function can be set in the

menu (10 to 30 minutes). The default duration of the

after-run function is 20 minutes.



When the extractor is switched off at the end of

cooking the automatic after-run function is activated.



Once the automatic after-run period has lapsed the

cooktop extractor switches itself off.

INFO BORA expressly recommends use of the cooktop

extractor after-run function.

Recirculation filter service indicator

The cooktop extractor filter service indicator is

automatically activated when the end the activated

carbon filter service life is reached (only in recirculation

mode).



If the fan symbol lights up yellow and the multi-

function display

appears after switching on

the cooktop extractor, this is informing you that the

filter needs to be changed soon.



If the fan symbol lights up in signal red and the

error code

is shown in the multi-function

display after switching on the cooktop extractor, the

end of the filter service life has been reached and

the filter must be replaced (also see Cleaning and

Maintenance chapter).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bora CKCH Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bora CKCH

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info