Bedienungsanleitung Bora CKFI (Seite 36 von 64) (Englisch)

714388

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Operation

www.bora.com

Reducing the power level

 Tap the required cooking zone

 Swipe downwards to the required power level

 tap until the required power level is reached

 tap a lower position on the slider

 long press on (power level is decreased in threes:

... 6, 3, 0)

INFO If after setting a power level on induction

cooktops CKFI, CKI and CKIW no suitable

cookware is detected (pan size recognition) within

9 minutes, the corresponding cooking zone will be

automatically switched off.

Power-level adjustment on the Tepan

stainless steel grill CKT

INFO The Tepan stainless steel grill power levels are

shown in the corresponding cooking zone display

as a 7-segment font (

ßp

When a cooking zone is selected the temperature

is shown in °C in the multi-function display above

the slider (temperature indicator).

INFO During the initial heating phase the actual

temperature is shown in the multi-function display

until the target temperature is reached in the

selected cooking zone.

Increasing the temperature

 Tap the required cooking zone

 Swipe upwards to the required target temperature

 tap until the required target temperature is reached

 tap a higher position on the slider

 long press on (power level is increased in threes: 0,

3, 6...)

INFO During the heating phase the red hot button

flashes, even if the operating panel display

changes to the standard display after 3.5

seconds. When the target temperature is reached,

it stops flashing.

Changing to another cooking zone

INFO

When you are in cooktop operating mode (colour

mode “red”) and adjust the settings for one

cooking zone, you can immediately change over to

and operate another cooking zone.

 Tap another cooking zone within 3.5 seconds.



The cooking zone lights up in the operating panel

display.



Operation of the second cooking zone is activated.



The first cooking zone is dimmed in the operating

panel display and the previous settings are adopted.

6.5.2 Setting cooking zone power levels

INFO The cooking zone power levels are shown in

the corresponding cooking zone display as a

7-segment font.

The cooking zone power levels can be adjusted in

different ways:

 tap on or

 adjustment using the slider

 by tapping a certain position on the slider

 long press on or (adjustment in threes)

Additional instructions for gas cooktop CKG:

INFO After setting a power level, gas cooktop CKG is

automatically ignited and the cooking zone is

operated at the set power level.

INFO The ignition process happens several times in

succession and generates a typical clicking noise.

INFO If it does not ignite, the procedure can be

repeated. When the desired cooking zone is

selected and the power level is set, the cooktop is

automatically reignited.

Power-level adjustment on cooktops CKFI,

CKI,

CKIW, CKCH, CKCB and CKG

Increasing the power level

 Tap the required cooking zone

 Swipe upwards to the required power level

 tap until the required power level is reached

 tap a higher position on the slider

 long press on (power level is increased in threes: 0,

3, 6...)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bora CKFI Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bora CKFI

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info