Bedienungsanleitung Bora CKI (Seite 54 von 64) (Englisch)

714389

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Cleaning and Maintenance

www.bora.com



A description of how to replace the activated carbon

filter can be found in its operating instructions.

Reset the filter service indicator (see the Menu

chapter, point 7.3.11).

9.4 Cleaning the cooktops

9.4.1 Cleaning glass ceramic (CKFI, CKI,

CKIW, CKCH, CKCB, CKG)

 Make sure that the cooktop is switched off (see the

Operation chapter).

 In the case of gas cooktop CKG, make sure the gas

supply is interrupted and switched off.

 Wait until all cooking zones are cold.

 Remove all coarse dirt and food residues from the

cooktop using a glass ceramic scraper.

 Apply the cleaning agent to the cold cooktop.

 Spread the cleaning agent using kitchen roll or a clean

cloth.

 Wipe the cooktop clean with a damp cloth.

 Dry the cooktop with a clean cloth.

If the cooktop is hot:

 Remove stubborn residues of plastic, aluminium foil,

sugar or sweet dishes from the hot cooking zone

immediately using a glass ceramic scraper to prevent

burning.

Heavy soiling

 Remove heavy soiling and marks (limescale marks,

mother-of-pearl-like shiny marks) using cleaning

products while the cooktop is still warm.

 Wipe off food that boils over with a damp cloth.

 Remove any remaining dirt with the glass ceramic

scraper.

 Always remove any seeds, crumbs or similar that fall onto

the cooktop during cooking immediately to prevent the

surface getting scratched.

Any changes in colour or glossy spots are not damage to

the cooktops. They do not affect the functionality of the

cooktop or the stability of the glass ceramic panel.

Changes in the colour of the cooktop are the result of

residues which have not been removed and have burnt

on.

Glossy spots are the result of wear by the pan base,

especially if aluminium-based cookware or unsuitable

cleaning agents are used. These are difficult to remove.

INFO In the case of gas cooktop CKG, due to the use of

enamelled cast iron parts, slight colour variations

and irregularities are common. Furthermore, flash

rust can appear at the support points, which can

be easily removed with a damp cloth. These spots

are normal and are not considered an impairment.

9.4.2 Cleaning Tepan stainless steel grill

surfaces (CKT)

INFO Use the scraper only on the grill surface as

otherwise other surfaces may be damaged.

INFO Clean the stainless steel surface in the polishing

direction only.

INFO Do not apply citric acid to surfaces adjacent to

the cooktop and worktop as the acid may damage

them.

INFO Do not use stainless steel care products on the

stainless steel surfaces or the stainless steel grill

surface.

INFO Use the Tepan stainless steel grill cleaning

function for cleaning (see Operation chapter).

Light soiling

 Make sure that the cooktop is switched off (see the

Operation chapter).

 Wait until the stainless steel grill surface has cooled.

 Remove light soiling with a damp cloth and detergent.

 To prevent water or limescale stains (yellowish

colouring), use a soft cloth to dry off the surfaces that

have been cleaned with water.

Normal soiling

 Ensure that the cleaning function is activated for both

grilling zones (see the Operation chapter).

 Wait until the grilling zone indicators are no longer

flashing (= optimum cleaning temperature of 70°C).

 Use only clean, cold water on the grill surface.

 Leave the water to work for 15 minutes.

 Then remove all coarse dirt and food residues using a

Tepan spatula.

 Remove the remaining dirt and water with a clean

cloth.

 Dry the cooktop with a clean cloth.

Heavy soiling

 Ensure that the cleaning function is activated for both

grilling zones (see the Operation chapter).

 Wait until the grilling zone indicators are no longer

flashing (= optimum cleaning temperature of 70°C).

 Dilute a dessert spoon of citric acid

(approx. 10 –15 ml) in a bowl of warm water

(approx. 200 ml).

 Pour the liquid on the grill surface.

 Leave the solution to work for approx. 5 – 8 minutes.

 Loosen burned-on food from the grill surface with a

plastic brush.

 Remove all remaining dirt and water (citric acid

solution) with a clean cloth.

 Use only clean, cold water on the grill surface.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bora CKI Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bora CKI

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info