Bedienungsanleitung Bora Pro - PKA (Seite 33 von 44) (Englisch)

711232

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Operation

www.bora.com

7 Operation

 Observe all safety and warning information during

operation (see the Safety section).

INFO The cooktop extractor must only be operated with

BORA cooktops.

INFO The cooktop extractor can only be operated if the

grease filter components are installed.

7.1 General operating instructions

The cooktop extractor is controlled using the control knob.

There are 9 power levels, 1 power setting and various

functions available:

A0 / C

Fig. 7.1 Knob ring assignment

Knob ring position Function

Fan off

Cleaning position

1 - 9

Power levels

Power setting

Automatic cooktop extractor function

Configuration menu (see the Installation

section)

Tab. 7.1 Knob ring positions

7.2 Operating the cooktop extractor

Recommendations for efficient vapour extraction

 Always use a lid on pots that are particularly high. This

ensures effective vapour extraction. It also reduces

power consumption.

 Only operate the cooktop extractor at the minimum

power level required for effective vapour extraction.

This enables you to improve the performance of the

odour filters in recirculation mode.

 Only operate the hob at the minimum power level

required for cooking. This reduces the cooking vapours

and the power consumption.

 Avoid strong drafts.

7.2.1 Switching on the cooktop extractor

Fig. 7.2 Switching on the cooktop extractor

 Turn the knob ring from the 12 o-clock position to

the power level you want. The knob clicks in at the

different levels.

 Avoid undefined interim positions.

INFO If the control knob ring is turned to an undefined

interim setting, the most recently selected power

level is automatically activated.

Adjusting the power level

 Turn the knob ring to the desired power level.



The power level selected is shown in the power display

on the control knob.

Set power setting

 Twist the knob ring to the 10 o’clock position.



The cooktop extractor will run for a maximum of

9 minutes on the power setting. P is displayed on the

power display on the control knob.

7.2.2 Automatic cooktop extractor function

INFO The extraction power is generally adjusted

30 seconds after the power level is set on the

cooktop.

 Twist the knob ring to the 11 o’clock position.



If now power level is yet set on one of the cooktops

connected,

is shown on the control knob display.



If, for example, one of the cooktops connected is set

to power level

, then the display changes to

and

the extraction power is automatically adjusted with a

30 second delay.



If all the cooking zones connected are switched off or

temporarily stopped, the automatic after-run starts.

Deactivate automatic cooktop extractor function:

 turn the knob ring to a power level, the power setting

or the 12 o-clock position.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bora Pro - PKA Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bora Pro - PKA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info