Bedienungsanleitung Bora Pro - PKFI 11 (Seite 25 von 36) (Englisch)

711280

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Operation

www.bora.com



Once the automatic heat up period has passed, the

power is reduced to the selected continuous cooking

level.



If a higher continuous cooking level is selected while

the automatic heat up function is active, the new heat-

up time is automatically valid.

6.2.5 Switching off the automatic heat up

function

The activated automatic heat up function will end

prematurely if you

 reduce the power level (continuous cooking level).

 set power level

 activate power setting

ßp

 activate heat retention level

 switch off the cooktop.

6.2.6 Heat retention level

Activating the heat retention level

15°

Fig. 6.3 Knob ring setting for heat retention level

INFO The knob ring position for the heat retention level

is between the 12 o’clock position and the 1

o’clock position.

 Turn the selector ring approximately 15° clockwise

from the 12 o’clock position until it lightly engages.



appears in the control knob display.

 Press the touch surface on the control knob for 1

second to activate the heat retention level 1.



This is confirmed with an acoustic signal and the

symbol

is displayed.

Heat retention

level

1 2 3

Symbol

. ; *

Temperature in °C 42 74 94

Tab. 6.2 Temperatures of heat retention levels

6.2.3 Bridging function

INFO If the bridging function is active, both cooking

zones will operate at the same time on the same

cooking zone.

INFO If the bridging function is activated, the power

setting

ßp

cannot be used.

Switching on the bridging function

Both control knobs are in the 12 o’clock position.

 Press the touch surface on both control knobs at the

same time for at least 1 second.



The left control knob display and the front cooking

zone indicator show



The right control knob display and the rear cooking

zone indicator show

 Within 3 seconds, twist the knob ring on the right hand

control knob to the power level you want.



The right-hand control knob can now be used to

control the power levels for both cooking zones.



The power level indicator for both cooking zones can

be seen in the display of the right control knob and in

the rear cooking zone indicator.



If the right-hand control knob is not twisted to a power

level within 3 seconds of the bridging function being

activated, the bridging function is deactivated ad the

cooktop is switched off.

Switching off bridging function

 Twist the right-hand control knob to the 12 o’clock

position.



The bridging function and the cooktop are now

switched off.

6.2.4 Automatic heat up function

Switching on the automatic heat up function

INFO The exact values for the heat-up time can be

found in the Device description section.

 Select the desired power level (= later continuous

cooking level).

 Within 3 seconds of setting the power level, press the

touch surface of the control knob for at least 1 second.



The automatic heat up function is activated and the

control knob shows an

in front of the continuous

cooking level selected (e.g.

INFO When the automatic heat up function is active,

is displayed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bora Pro - PKFI 11 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bora Pro - PKFI 11

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info