Bedienungsanleitung Bora Pro PKG11 (Seite 15 von 44) (Englisch)

714374

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Device description

www.bora.com

INFO The temperature information on the heat retention

levels can differ as they are influenced by the

cookware, the fill level, the different types of gas

and gas pressures. The temperature information

can also vary due to the influence of the cooktop

extractor.

4.3.6 Timer functions

There are two different timer functions for each cooking

zone.



appears in the control knob display.

INFO

You can set a time range of between 1 and

120 minutes for the timer functions.

Timer function

INFO The timer function is an automatic cut-off which

automatically switches off a cooking zone which

is in use.

Short-time timer (egg timer)

INFO The short-time timer requires the cooking zone to

be switched off and works like a conventional egg

timer.

4.3.7 Pause function

The cooking session can be temporarily interrupted (max.

10 minutes).



1 1

appears in the control knob display.

4.4 Safety devices

4.4.1 Safety thermocouple

The gas burners are equipped with a safety thermocouple.

This thermocouple monitors the burner flame when the

gas supply is active. If the burner flame accidentally goes

out, it is automatically reignited by the device. If reignition

is not possible, the gas supply is permanently stopped.

4.4.2 Residual heat display

INFO While

is displayed in the control knob display

(residual heat display), do not touch the cooking

zone or place any heat-sensitive objects on top of

it. Risk of burns and fire!

After switching it off, the cooking zone remains hot.

appears in the control knob display (residual heat

display). The display goes out after a sufficient cooling

time (temperature < 60 °C).

4.3.3 Power setting

The two cooking zones are equipped with a power-

enhancing power setting.



appears on the control knob display.

The power setting can be used in order to quickly heat up

large quantities of water. If the power setting is activated,

the cooking zone will run at extra high power. After

10 minutes, the cooking zone is automatically switched to

power level

INFO Never heat up oil, fat and the like at this power

setting. The bottom of the pan can overheat due

to the high power output.

4.3.4 Automatic heat up function

The two cooking zones are equipped with an automatic

heat up function that can be switched on and off.



appears in front of the power level on the control

knob display.

This function enables the cooking zone to work at full

power for a certain duration after switching on. After this

time, the power level is automatically switched back to

the power level set.

Power level Cooking duration in min:sec

00:40

01:00

02:00

03:00

04:20

07:00

02:00

03:00

Tab. 4.4 Overview of the automatic heat up function

4.3.5 Heat retention levels

The heat retention level keeps cooked foods warm.



appears in the control knob display.



The maximum duration for the warming function is

limited to 8 hours.

There are three different heat retention levels:

Heat retention level Symbol Temperature

40° C

55° C

70° C

Tab. 4.5 Heat retention levels

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bora Pro PKG11 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bora Pro PKG11

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info