Bedienungsanleitung Bora Pura (Seite 39 von 60) (Englisch)

714404

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Operation

www.bora.com

7 Operation

XXObserve all safety and warning information during operation

(see Safety chapter).

i Do not operate the integrated cooktop extractor with

other cooktops.

i The cooktop should only be operated when the filter

replacement cover, stainless steel grease filter and

air inlet nozzle are installed (as well as the activated

charcoal filter in the recirculation model).

7.1 General operating instructions

The cooktop extractor and cooktops are operated via a central

operating panel. The operating panel is fitted with electronic

sensor buttons and display panels. The sensor buttons respond

to finger contact (see Appliance description chapter).

You control the appliance by tapping the corresponding sensor

button with your finger (touch control) or making a swiping

movement with your finger (slider control).

7.2 Touch control

i The system recognises different touch commands.

It differentiates between a brief touch (tap), a prolonged

touch (long press) and vertical sliding movements with

your finger (swiping).

Touch commands applicable to Time (contact)

Tap Buttons + slider 0.3 s

Long press Buttons + slider 1 – 8 s

Swipe Slider 0.1 – 8 s

Tab. 7.1 Touch control

7.3 Operating the system

7.3.1 Switching on

XXLong press on the power button

XO The switch-on animation is displayed in the slider.

XO If start-up is successful, the standard display will appear in the

operating panel.

Fig. 7.1 Standard display after switching on

i If the childproofing feature is active, the lock button

will light up after system start-up. The standard

display will only appear once it has been unlocked (see

Childproofing feature).

7.3.2 Switching off

XXLong press on the power button .

XO The switching-off animation is displayed.

If the cooktop extractor has been on:

XO The fan symbol will light up and the automatic after-run

function will start (the automatic after-run animation is

displayed).

XO The display goes out when the after-run time has lapsed.

If the cooktop has been on:

XO The residual heat indicator

is displayed for previously active

and still hot cooking zones.

XO The display goes out when no more residual heat is present.

7.3.3 Control lock

Activating the control lock

XXLong press on the lock button .

XO The operating panel display is dimmed.

XO The lock button lights up.

XO All functions are deactivated except for the power button and

the lock button.

i If the system is switched off when the control lock is

active, the control lock will no longer be active next time

the system is switched on.

Deactivating the control lock

XXLong press on the lock button .

XO The standard display lights up and the operating panel is

reactivated.

XO The lock button is dimmed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bora Pura Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bora Pura

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info