Bedienungsanleitung Bora Puxa (Seite 42 von 60) (Französisch)

714406

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Operation

www.bora.com

 long press on the fan power level in the multi-function

display.



The automatic after-run function is started.

7.5 Operating the cooktop

7.5.1 Selecting a cooking zone

 Tap on a cooking zone



The cooking zone controls are activated for 2 seconds

and you can apply settings to the chosen cooking

zone.



The additional cooking zone functions appear.

 Repeat this process to operate further cooking zones if

necessary.

Changing to another cooking zone

 Tap another cooking zone within 2 seconds.



The cooking zone lights up in the operating panel

display.



Operation of the second cooking zone is activated.



The first cooking zone is dimmed in the operating

panel display and the previous settings remain active

or are adopted.

7.5.2 Setting cooking zone power levels

INFO The cooking zone power levels are shown in

the corresponding cooking zone display as a

7-segment font (

INFO Two seconds after the power level is changed, the

operating panel display automatically returns to

the standard display.

The cooking zone power levels can be adjusted in 3

different ways:

 By tapping a certain position on the slider.

 By swiping until you reach the required power level.

 By tapping or .

Increasing the power level

 Tap the required cooking zone

 Tap a higher position on the slider.

 swipe upwards to the required power level

 tap until the required power level is reached.

Reducing the power level

 Tap the required cooking zone.

 Tap a lower position on the slider

 swipe downwards to the required power level

 tap until the required power level is reached.

Increasing the power level

 Tap a higher position on the slider

 swipe upwards to the required power level

 tap until the required power level is reached.

Reducing the power level

 Tap a lower position on the slider

 swipe downwards to the required power level

 tap until the required power level is reached.

7.4.2 Fan power setting

Activating the fan power setting

 Tap on when power level 9 is active.



ßp

appears in the display.

INFO After 5 minutes, the power setting is automatically

switched back to power level 9.

Deactivating the fan power setting

The fan power setting is deactivated early if another

power level is set (see Fan power levels).

7.4.3 Automatic extractor control

INFO The automatic extractor function automatically

adjusts the extraction performance to the highest

power level used on all connected cooking zones.

If the cooking zone power level is changed, the

extractor power is automatically adjusted.

INFO The extractor power is adjusted after a 20 second

delay.

Activating the automatic extractor function:

 tap the fan button .



The fan symbol lights up.



An animation appears on the slider.



is displayed.

Deactivating the automatic extractor function:

 Swipe

to a fan power level

 tap the fan button .

7.4.4 Switching the fan off

 Swipe downwards to power level 0

 tap until power level 0 is reached.

 long press on the fan button .

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bora Puxa Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bora Puxa

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info