Bedienungsanleitung Bora Puxa (Seite 52 von 60) (Französisch)

714406

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Cleaning and Maintenance

www.bora.com

 Inside the inlet opening pull the filter replacement

cover out of the filter housing opening (To remove the

filter replacement cover see Fig. 8.5).

5 4 3

Fig. 8.4 Air guiding housing

[1] Air guiding housing

[2] Housing base

[3] Spigot

[4] Sealing groove

[5] Lock

 Hold the housing base [2] with one hand.

 Release the 6 locks [5] around the edge of the base.

 Remove the housing base [2].

 Clean the air guiding housing [1] and the housing base

[2] with a mild cleaning agent.

8.5.2 Closing the air guiding housing

 Position the housing base [2] under the air guiding

housing [1] with the help of the 3 spigots[1].

 Push the housing base [2] upwards into the sealing

groove [4].

 Close the 6 locks [5].

 Check that the housing base is positioned correctly.

 Inside the inlet opening push the filter replacement

cover until it comes to a stop in the filter housing

opening (To insert the filter replacement cover see Fig.

8.11).

 Check that the filter replacement cover is positioned

correctly.

 Insert the stainless steel grease filter and the air inlet

nozzle.

Cleaning in the dishwasher

 Remove coarse food residues from the stainless steel

filter

 Rinse the air inlet nozzle and stainless steel grease

filter with a rinsing program at maximum 65 °C.

8.4.3 Fitting the components

Inserting the stainless steel grease filter

 Take hold of the stainless steel grease filter by the

handle [2].

 Insert the stainless steel grease filter [1] in the inlet

opening [3]. A lock is not provided or necessary.

Inserting the air inlet nozzle

 Insert the air inlet nozzle in the inlet opening.

 Make sure it is positioned correctly.

8.4.4 Removing liquids from the device

Any liquids that flow into the device through the inlet

opening are caught by the stainless steel grease filter

(up to 150 ml) and in the air guiding housing. Do the

following:

 Switch off the fan and deactivate the after-run function

(see Operation chapter).

 Remove the air inlet nozzle and stainless steel grease

filter (see Cleaning and Maintenance chapter).

 Empty the stainless steel grease filter.

 Check whether any liquid has gathered in the base of

the air guiding housing.

 If necessary, wipe the liquid up from the housing base

from above through the inlet opening using a sponge

or cloth.

 Clean the air guiding housing (see Cleaning and

Maintenance chapter, air guiding housing).

 To dry the odour filter and duct parts respectively,

switch on the cooktop extractor at a minimum power

level of 5.



After 120 minutes the cooktop extractor will

automatically switch to the automatic after-run

function (see Device Description chapter).

8.5 Cleaning the air guiding housing

Grease particles and limescale residues from cooking

vapours can settle on the surface of the air guiding

housing. For this reason, regular cleaning is essential.

The air guiding housing can be found on the bottom of the

cooktop inside the floor unit.

8.5.1 Opening the air guiding housing.

 Make sure that the cooktop and cooktop extractor are

switched off (see the Operation chapter).

 Wait until the fan level indicator shows

 Remove the air inlet nozzle and stainless steel grease

filter.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bora Puxa Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bora Puxa

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info