Bedienungsanleitung Bora Puxu (Seite 26 von 60) (Französisch)

714407

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Installation

www.bora.com

6.4 Assembly instructions

6.4.1 Required clearance distances

 Observe the required clearance distances.

Fig. 6.3 required clearance distances

[1] Minimum clearance of 50 mm between the worktop cut-out

and the rear edge of the worktop.

[2] Minimum clearance of 300 mm from the left and right of the

worktop cut-out to the adjacent cabinet or wall.

[3] Minimum clearance of 600 mm between the worktop

and the wall unit. A minimum clearance of 1000 mm is

recommended for ergonomic reasons.

6.4.2 General kitchen unit specifications



Cross bars on the kitchen unit in the area of the

worktop cut-out may need to be removed.



In the case of thin worktops, there must be a

sufficiently rigid support plate on the unit.



No false floor is necessary below the cooktop. If cable

protection (false floor) is planned, the following must

be taken into account:



It must be fitted in such a way that it can be

removed for maintenance work.



To ensure sufficient cooktop ventilation, a minimum

distance of 15 mm to the bottom edge of the

cooktop is to be observed.



The drawers and/or shelves in the floor unit must be

removable.



For correct installation, the slide-in units of the

base cabinet must be shortened depending on the

installation situation.

6.1.2 Home In module PUHIM (optional)

Via this additional interface it is possible to establish a

connection to other systems and, for example, a window

contact switch or low pressure warning device can be

connected. The module is to be integrated in the cooktop.

INFO The BORA Pure Home In module PUHIM is

available as an accessory (including installation

instructions).

INFO The BORA window contact switch UFKS is

available as an accessory (including installation

instructions).

6.2 Scope of delivery

Scope of delivery: PUXA, PUXU, PURA, PURU Quantity

Cooktop with integrated cooktop extractor 1

Air inlet nozzle 1

Stainless steel grease filter 1

Operating and installation instructions 1

Installation clamps 4

Sealing tape 1

Height adjustment plate set 1

Glass ceramic scraper 1

Bag containing various small parts for assembly 1

Additional scope of delivery: PURU, PUXU

Activated charcoal filter 1

Template for back wall cut-out 1

Tab. 6.1 Scope of delivery

6.2.1 Checking the scope of delivery

 Make sure the delivery is complete and check it for

damage.

 If there are any missing or damaged parts, please

notify BORA After Sales Service immediately.

 Do not under any circumstances install parts which are

damaged.

 Dispose of transport packaging in the proper manner

(see the Decommissioning, disassembly and disposal

section).

6.3 Tool and aids

The following special tools are required to correctly install

the cooktop:



Compass saw or hand saw



Drilling template for cut-out on rear wall PURU

(included in scope of delivery)



Torx 20 screwdriver



Black, heat-resistant silicone sealant

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bora Puxu Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bora Puxu

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info