Bedienungsanleitung Boretti BIK79 (Seite 59 von 68) (Deutsch, Englisch, Holländisch, Französisch)

533761

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Residual heat indication

After the switch off of a heating zone or the complete stop of the hob, the heating zones are still hot

and indicates [ H ] on the display.

The symbol [ H ] disappears when the heating zones may be touched without danger.

As far as the residual heat indicators are on light, don’t touch the heating zones and don’t put any

heat sensitive object on them. There are risks of burn and fire.

Booster function

The booster function [ P ] grants a boost of power to the selected heating zone.

If this function is activated the heating zones work during 5 minutes with an ultra high power.

The booster is foreseen for example to heat up rapidly big quantities of water, like noodles cooking.

 Start up / Stop the booster function:

Action

Control panel Display

Zone selection press key [ 0 ] from the zone [ 0 ] and control light on

Start up the booster press key [ P ] [ P ]

Stop the booster slide on the “SLIDER“ [ P ] to [ 0 ]

or press on [ P ] [ 9 ]

 Power management:

The hole cooking hob is equipped by a maximum of power. When the booster function is activated,

and not to exceed the maximum power, the electronic system orders to reduce automatically the

power level of an other heating zone. The display is blinking on [ 9 ] during a few seconds and then

shows the maximum of power allowed :

Heating zone selected

The other heating zone: (example: power level 9)

[ P ] is displayed [ 9 ] goes to [ 6 ] or [ 8 ] depending the type of zone

Timer

The timer is able to be used simultaneous with all 4 heating zones and this with different time

settings (from 0 to 99 minutes) for each heating zone.

 Setting and modification of the cooking time:

Example for 16 minutes at power 7:

Action

Control panel Display

Zone selection press display [ 0 ] selected [ 0 ] and control light on

Select the power level slide on the “SLIDER“ to [ 7 ] [ 7 ]

Select « Timer » press display [ CL ] [ 00 ]

Set the units slide on the “SLIDER“ to [ 6 ] [ 0 fixed ] [ 6 blinking ]

Valid the units press display [ 06 ] [ 0 blinking ] [ 6 fixed ]

Set the tens slide on the “SLIDER“ to [ 1 ] [ 1 blinking ] [ 6 fixed ]

Valid the tens press display [ 16 ] [ 16 ]

The time is confirmed and the cooking starts.

 To stop the cooking time:

Example for 13 minutes at power 7:

Action Control panel Display

Zone selection press display [ 7 ] selected [ 0 ] and control light on

Select « Timer » press key [ 13 ] [ 13 ]

Deactivate the units slide on the “SLIDER“ to [ 0 ] [ 1 fixed ] [ 0 blinking ]

Valid the units press display [ 10 ] [ 1 blinking ] [ 0 fixed ]

Deactivate the tens slide on the “SLIDER“ to [ 0 ] [ 0 blinking ] [ 0 fixed ]

Valid the tens press display [ 00 ] [ 00 ]

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Boretti BIK79 Seite 59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info