Bedienungsanleitung Boretti BVW 96 (Seite 75 von 96) (Deutsch, Englisch, Holländisch, Französisch)

534008

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

return to setting mode, the programme has

to be cancelled.

To cancel a programme in progress

• Simultaneously press and hold the two

function buttons B and C until all the pro-

gramme button lights come on. The pro-

gramme has been cancelled and the ap-

pliance is now in setting mode.

Audible signals

Audible signals help to indicate which oper-

ations the appliance is performing:

– adjustment of the water softener,

– end of the washing programme,

– intervention of an alarm due to malfunction

of the machine.

Factory setting: audible signals active

It is possible to deactivate the audible

signals.

Deactivation/activation of the audible signals

1. Press the on/off button. The appliance

must be in setting mode.

2. Simultaneously press and hold function

buttons B and C until the lights of function

buttons A, B and C start flashing.

3. Press function button C,

– The lights of function buttons A and B

go off,

– the light of function button C goes on

flashing,

– at the same time the end of pro-

gramme indicator light comes on.

The audible signals are active.

4. To deactivate the audible signals:

– press function button C,

– the end of programme indicator light

goes off.

The audible signals are deactivated.

5. To memorize the operation, switch off the

appliance.

To activate again the audible signals fol-

low the above operations until the end of

programme indicator light comes on.

First use

Before using your dishwasher for the first

time:

• Ensure that the electrical and water con-

nections comply with the installation in-

structions

• Remove all packaging from inside the ap-

pliance

• Set the water softener level

• Pour 1 litre of water into the salt container

and then fill with dishwasher salt

• Fill the rinse aid dispenser

If you want to use combi detergent

tablets such as: '3 in 1', '4 in 1', '5 in

1' etc. set the multitab function. (Re-

fer to 'Multitab function').

Setting the water softener

The dishwasher is equipped with a water

softener designed to remove minerals and

salts from the water supply, which would

have a detrimental or adverse effect on the

operation of the appliance.

The higher the content of these minerals and

salts, the harder your water is. Water hard-

ness is measured in equivalent scales, Ger-

man degrees (dH°), French degrees (°TH)

and mmol/l (millimol per litre - international

unit for the hardness of water).

The softener should be adjusted according

to the hardness of the water in your area.

Your local Water Authority can advise you on

the hardness of the water in your area.

The water softener must be set in two

ways: manually, using the water hard-

ness dial and electronically.

Water hardness Adjusting the water hardness setting Use of

salt

°dH °TH mmol/l manually electronically

51 - 70 91 - 125 9,1 - 12,5 2 level 10 yes

43 - 50 76 - 90 7,6 - 9,0 2 level 9 yes

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Boretti BVW 96 Seite 75

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info