Bedienungsanleitung Boretti BVW 96 (Seite 83 von 96) (Deutsch, Englisch, Holländisch, Französisch)

534008

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

6. To deactivate the rinse aid dispenser

again, follow the above instructions until

the End indicator light goes off.

If you decide to revert back to the

use of individual detergents we ad-

vise that you:

1. Deactivate the Multitab function.

2. Fill up the salt container and the rinse

aid dispenser again.

3. Adjust the water hardness setting to

the highest setting and perform 1

normal washing programme without

loading any dishes.

4. Adjust the water hardness setting

according to the hardness of the wa-

ter in your area.

5. Adjust the rinse aid dosage.

Select and start a washing programme

Select the washing programme and

delay start with the door slightly

opened. The start of the programme

or the countdown of the delay start

will occur only after the closure of

the door. Until then it is possible to

modify the settings

1. Check that the baskets have been loaded

correctly and that the spray arms are free

to rotate.

2. Check that the water tap is opened.

3. Press the on/off button. The dishwasher

must be in setting mode.

4. Press the button corresponding to the re-

quired programme. The indicator light of

the selected programme comes on. Re-

fer to 'Washing programmes' for more

details.

Close the appliance door, the pro-

gramme starts automatically.

Setting and starting the programme with

delay start

1. After having selected the washing pro-

gramme, press the delay start button until

the indicator light corresponding to the

chosen hours flashes (3h, 6h or 9h).

– The delay start indicator light comes

on.

2. Close the appliance door, the countdown

starts automatically.

3. The countdown will decrease with steps

of 3 hours.

4. Once the delay start has elapsed the pro-

gramme will start automatically.

– The delay start indicator light goes off.

The opening of the door will interrupt the

countdown. Close the door; the count-

down will continue from the point at

which it was interrupted.

Warning! Interrupt or cancel a

washing programme in progress

ONLY if it's absolutely necessary.

Attention! Hot steam may escape

when the door is opened. Open the

door carefully.

Interrupt a washing programme in

progress

• Open the dishwasher door; the pro-

gramme will stop. Close the door; the pro-

gramme will start from the point at which

it was interrupted.

Cancel a delay start or a washing

programme in progress

• Simultaneously press and hold the two

function buttons B and C until all the pro-

gramme lights come on.

• Cancelling a delay start will also cancel the

washing programme. You have to select

the washing programme again.

• If a new washing programme is to be se-

lected, check that there is detergent in the

detergent dispenser.

End of the washing programme

The appliance will automatically stop and an

audible signal informs you of the end of the

washing programme.

1. Open the appliance door.

– The end of programme indicator light is

on.

– The indicator light of the programme

just ended remains on.

2. Switch of the appliance.

3. Leave the appliance door ajar for a few

minutes before removing the dishes. In

this way they will be cooler and the drying

will be improved.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Boretti BVW 96 Seite 83

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info