Bedienungsanleitung Boretti IBRIDO (Seite 35 von 63) (Englisch, Holländisch, Französisch)

731628

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

4 Use of your barbecue

4.1 General information

Even though all gas connections on the

barbecue are tested for leakages before

transport, a complete test must be carried

out at the assembly site. During transport or

assembly, parts of the barbecue may have

been moved. It is also possible that the gas

pressure on the equipment is too high.

Regularly inspect the entire system for leaks

and check the system immediately in the

event that you smell gas.

4.2 Gas leak test

Always carry out a gas leak test before use of the barbecue and when the barbecue has not been

used for some time.

•Extinguish any open fires (DO NOT SMOKE when testing for leaks).

•Never carry out this gas leak test near open flames.

•Make a soapy solution made up from equal parts of water and liquid soap or gentle washing-

up liquid

•Follow the steps below:

1. Turn the control knobs of the burners to off.

2. Remove the battery from the electronic ignition.

3. Open the gas bottle.

4. Apply the soapy solution to all connections of the gas supply. If no soap bubbles are

formed, there is no gas leak. If soap bubbles start to form on a connection, this indicates

a leak. In the event that you detect a leak, turn the gas supply off immediately, tighten

the leaking connections firmly, open the gas bottle again and repeat steps 1 through to 4.

5. Turn the gas supply off.

6. Turn the control knobs of the burners on for 10 seconds to let the pressure escape from

the hose and then turn the control knobs to off again.

7. Remove the soapy solution from the connections of the equipment with cold water and

rub dry with a cloth. Check all gas supply connections before every use and do the same

when the gas bottle is being connected to the gas pressure regulator.

It is recommended that you check the gas hose for leaks every year, even if the gas

bottle has never been disconnected from the equipment.

•Note: Ensure that you test all loose connections (including the side burner) and, if required,

tighten them again when you are testing the equipment for leaks. Even a small leak in the

system can result in a dangerous situation.

•Note: These days, most gas bottles are fitted with a mechanism that detects leaks inside the

container. When the gas is being released too quickly, this mechanism cuts off the gas

supply. A leak can severely restrict the gas supply which will make it difficult to light the

barbecue.

•Note: If you are unable to close off a gas leak, then turn off the gas supply and contact your

sales outlet. Even a small leak can cause a fire.

•Note: If, after several attempts, you are unable to light the barbecue, then contact your sales

outlet.

•Note: Esure that the otrol kos are i the OFF positio he you are ot usig the

equipment.

Gasbottle 10 kg

Max 560mm

Max 304mm

Gasbottle 5-6 kg

Max 470mm

Max 300mm

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Boretti IBRIDO Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info