76115
84
Zoom out
Zoom in
Vorherige Seite
1/100
Nächste Seite
84
Operating the
Programmable
Analog Clock
If the small display (Fig. 2d) shows a “0”, the
child–proof lock has been activated for your oven,
and therefore it cannot be used. If the hand sym-
bol shows on the display (Fib 2d), the oven is set
to manual. You can activate the manual function
by turning the button (Fig. 2e) to the right, wit-
hout pressing on it.
Setting the Correct Time
Press on the button and turn it to the right until
the current time is shown. The time is shown by
the hands shown in Figure 2a and 2b.
Manual Function
You can select the manual function by turning the
button (Fig 2e) to the right until the hand is dis-
played (Fig. 2d). Using this function, you can set
the desired temperature and oven function, and
use the oven immediately.
Timer with Automatic Countdown
It is easy to set the desired cook time by turning
the button (Fig. 2e) to the right, without pressing
on it, until you see the desired cook time in the
small display (Fig. 2d). Cook time can be set to a
maximum of 180 minutes.
Next, choose the temperature and the oven func-
tion. After the selected cook time has ended, an
audio signal will sound. The oven will switch off.
You can switch off the audio signal by setting the
button (2e) to manual.
Pre–Programmed Baking
1. Programmed Baking Function with Preset Start
Time
In order to adjust the oven in such a way that it
will switch on without switching off automatically
after cook time has ended, you must follow these
steps:
Turn the button (Fig 2e) to the right until “0” ap-
pears in the display (Fig. 2d). Carefully pull the
button towards you, and turn it to the right until
the hand (Fig. 2c) indicates your desired start
time. Let go of the button, and now turn it to
the right until the hand appears in the display.
Now select the correct baking function and tem-
perature.
Caution: When using this function, the oven must
be switched off manually!
Caution: Some dishes are perishable and cannot
remain in an uncooled oven for an extended period
of time.
Caution: Take preheating time into account when
determining the cook time for the automatic ba-
king function with preset start and end times.
2. Programmed Baking Function with Preset Start
and End Times
In order to adjust the oven in such a way that you
can determine the end time before starting, fol-
low these steps:
Turn the button (Fig 2e) to the right until “0” ap-
pears in the display (Fig. 2d). Carefully pull the
button towards you, and turn it to the right until
the hand (Fig. 2c) indicates your desired start
time. Next, turn the button until the desired cook
time appears in the display (Fig. 2d). Maximum
adjustable cook time is 180 minutes. Now set
the oven to desired oven function and adjust the
temperature. Your oven will switch on at the
time selected, and continue for the period set by
you. After the cook time has ended, the oven will
switch off automatically and an audio signal will
sound. You can switch off the signal by turning
the button to the right until the hand appears in
the display.
Figure 2
84

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Boretti VFPN 120 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info