Bedienungsanleitung Bort BSS-1800N-Pet (Seite 12 von 28) (Englisch)

555078

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

PROTECTIVE DEVICES OF MOTOR

1. There is a temperature controller designed in the

body of cleaner motor, which can automatically cut

off the power supply of motor to prevent overheating.

When the air-inlet or air-outlet pipe is overloaded or

blocked, the temperature of motor rises, then the

temperature controller cuts off the power supply of

motor automatically to make the motor cool, preventing

the cleaner from being damaged.

2. If the temperature controller is cut off, stop the

cleaner immediately and pull out the power plug to

make the cleaner cool, and check and remove the

hair roll or other roll-like rubbish blocking the air inlet

(including the hose and the spile), and replace the ﬁ lter

HEPA or ﬁ lter gauze when necessary.

3. After cooling the motor for 30mins, plug in the power

plug and check whether the temperature controller has

been reset. If the power supply of the cleaner hasn’t

been cut off, the temperature controller of the motor

won’t be reset even when the motor has become cool.

MAINTENANCE OF THE CLEANER

All the day-to-day maintenance and repair jobs should

be done after the power plug has been pulled out.

2. Frequently remove the rubbish from the dust barrel,

so as to avoid the failure of the cleaner.

3. Never wipe the surface of the cleaner with gasoline

or oily liquid. Wipe it with water or neutral detergent.

Caution: be sure to wring out the wiping cloth dry for

wiping, it is prohibited for water to inﬁ ltrate into electrical

elements of the cleaner.

3. When the cleaner is placed idle not in use, it should

not be put directly in the sun or in a damp place.

STORAGE OF THE CLEANER

1. Upon the completion of the operation of the cleaner,

turn off its power supply, and pull the power plug out of

the power socket, then step on the cord reeling button

to reel in the power cord fully. Hang the ﬂ oor brush onto

the ﬂ oor brush hook, as is shown in Figure (7).

1. Place the cleaner in the dry indoor environment.

CLEANING OF THE DUST BARREL

Remove the rubbish in the dust barrel frequently to

avoid the failure of the cleaner.

1. Clean the dust barrel only after the power plug of the

cleaner has been pulled out;

2. Put the dust barrel over the rubbish bin (bag), press

down the releasing button of the dust barrel, the bottom

cover of the dust barrel will automatically fall down, and

clear and empty the dust barrel, as is shown in Figure

(8).

ASSEMBLY OF HOSE

1. As is shown in Figure (3), insert the hose into the

duct inlet of the machine body in horizontal direction.

Please pay attention to the alignment of two projecting

parts. Turn the hose right when it is pushed into the

bottom, a click of inserting sound may be heard, i.e. the

hose is assembled into the machine body completely.

2. ASSEMBLY AND REMOVAL OF DUST

BARREL

As is shown in Figure (4), place the bottom of the dust

barrel on the projecting part at the front end of the

machine body, and press down the dust barrel. When

the front-end hook is entered into the corresponding

part of the machine body completely, and a click of

inserting sound is heard, which indicate that the dust

barrel is assembled in place. To remove the dust barrel,

press down the handle of the dust barrel; when the

handle is pressed down to the bottom, the dust barrel

can be lifted to remove.

ASSEMBLY OF METAL EXTENSION PIPE

AND FLOOR BRUSH

Insert the front end of the hose handle into the metal

extension pipe according to Figure (5); then insert

the other end of the metal extension pipe into the

rounded inlet of the ﬂ oor brush, and adjust to the

proper direction. At this time, the assembly of the whole

machine is completed.

OPERATION INSTRUCTIONS

HOW TO START

1. First of all, pull out the power cord from the cord reel

to the needed length; insert the power cord plug into

the power socket, and press down the power switch

button with ﬁ nger or step on it with foot; then you can

control the start and stop of the cleaner.

2. The yellow mark on the power cord indicates its

desired length. Never pull out the power cord to the

length exceeding the red mark.

CONTROL OF SUCTION FORCE

When the suction inlet is jammed by some cloth due

to the over-large suction force, you can adjust the air

escape pushbutton on the hose handle to control the

suction force at the suction inlet, as is shown in Figure

(6).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bort BSS-1800N-Pet Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info