Bedienungsanleitung Bosch 0 607 452 604 (Seite 14 von 126) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

97286

Zoom out

Zoom in

Vorherige Seite

1/126

Nächste Seite

14 | English 3 609 929 A78 • 8.8.06

c) Do not use a pneumatic tool if switch does

not turn it on or off. Any pneumatic tool that

cannot be controlled with the switch is danger-

ous and must be repaired.

d) Disconnect the air hose from the air source

before making any adjustments, changing

accessories, or storing the pneumatic tool.

Such preventive safety measures reduce the risk

of starting the pneumatic tool accidentally.

e) Store idle pneumatic tools out of the reach

of children and do not allow persons unfa-

miliar with the pneumatic tool or these

instructions to operate the pneumatic tool.

Pneumatic tools are dangerous in the hands of

untrained users.

f) Maintain pneumatic tools. Check for mis-

alignment or binding of moving parts,

breakage of parts, and any other condition

that may affect the operation of the pneu-

matic tool. If damaged, have the pneu-

matic tool repaired before use. Many

accidents are caused by poorly maintained

pneumatic tools.

g) Keep cutting tools sharp and clean. Prop-

erly maintained tools with sharp cutting edges

are less likely to bind and are easier to control.

h) Use the pneumatic tool, accessories, and

tool bits, etc., in accordance with these

instructions and in the manner intended

for the particular type of pneumatic tool,

taking into account the working conditions

and the work to be performed. Use of the

pneumatic tool for operations different from

those intended could result in a hazardous situ-

ation.

5) Service

a) Have your pneumatic tool serviced by a

qualified repair person using only identical

replacement parts. This will ensure that the

safety of the pneumatic tool is maintained.

Specific Safety Rules

Avoid contact with a live wire. The

pneumatic tool is not insulated and con-

tact with a live wire results in electric shock.

f Use suitable detectors to determine if utility

lines are hidden in the work area or call the

local utility company for assistance. Contact

with electric lines can lead to fire and electric shock.

Damaging a gas line can lead to explosion. Pene-

trating a water line causes property damage or may

cause an electric shock.

f Disconnect all fuses or circuit breakers that

feed the work area before you drill, cut, or

attach anything in this area. This eliminates the

danger of electric shock.

f Use only flawless tool bits that are not worn.

Defective tool bits can break, for example, and

cause injury or damage.

f When you install the tool bit, take care that

the tool bit is seated securely on the tool bit

holder. If the tool bit is not joined securely to the

tool bit holder, it may become loose and it may no

longer be controllable.

f Place the tool bit onto the nut/screw only

when the screwdriver is switched off. Rotating

tool bits can slide off the nut/screw.

f Be careful when long screws are screwed in.

Depending on the type of screw and the tool

bit used, there is a danger of slipping. Long

screws are often difficult to control and the danger

exists that the tool bit may slip off the fastener head

and cause injury.

f Support the nutrunner with, for example, a

reaction bar when you are working at high

torque. Work at high torques may result in damag-

ing reaction torques, which can be reduced by

using a support device.

f Be careful in confined work spaces. Keep your

hands away from the reaction bar. Reaction

torques may result in injuries due to pinching or

crushing.

DANGER

OBJ_BUCH-220-001.book Page 14 Tuesday, August 8, 2006 9:41 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch 0 607 452 604 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info