Bedienungsanleitung Bosch AdvancedGrind 18 SystemBox (Seite 20 von 323) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

766843

Zoom out

Zoom in

Vorherige Seite

1/323

Nächste Seite

20 | English

(14) Cutting disca)

(15) Carbide grinding heada)

(16) Quick-clamping nut with bar

(17) Grinding spindle

(18) Hand guarda)

(19) Rubber sanding pada)

(20) Abrasive disca)

(21) Round nuta)

(22) Cup brusha)

(23) Handle (insulated gripping surface)

(24) Extraction guard for cutting with a cutting guidea)

(25) Diamond cutting disca)

a) Accessories shown or described are not included with the

product as standard. You can find the complete selection of

accessories in our accessories range.

Technical Data

Angle grinder AdvancedGrind 18

Article number 3603CD90..

Rated voltage V= 18

Rated speedA) min-1 11500

Speed adjustment range min-1 2800–11500

Max. grinding disc diameter mm 125

Grinding spindle thread M 14

Max. thread length of grind-

ing spindle mm 21,7

Constant electronic control ●

Speed preselection ●

Soft start ●

Restart protection ●

Overload protection ●

Weight according to EPTA-Procedure01:2014B)

– with low-vibration auxili-

ary handle kg 2.7 (2.5 Ah)–

3.2 (6.0 Ah)

– with standard auxiliary

handle kg 2.4 (2.5 Ah)–

3.0 (6.0 Ah)

Recommended ambient tem-

perature during charging °C 0to+35

Permitted ambient temperat-

ure during operationC) and

during storage

°C –20to+50

Recommended rechargeable

batteries PBA 18V...W-.

Recommended chargersD) AL 18...

A) Measured at 20–25°C with rechargeable battery PBA 18V

6.0Ah.

B) Depends on battery in use

C) Limited performance at temperatures <0°C

D) The following chargers are not compatible with the PBA re-

chargeable battery: AL 1814 CV, AL 1820 CV, AL 1860 CV

Noise/Vibration Information

Noise emission values determined according to

EN60745-2-3.

Typically the A-weighted noise level of the power tool are: 86

dB(A); sound power level 97 dB(A). Uncertainty K = 3 dB.

Wear hearing protection!

Vibration total values ah (triax vector sum) and uncertainty K

determined according to EN60745-2-3:

Surface grinding (roughing):

ah=10.0m/s2, K=1.5m/s2,

Disc sanding:

ah=4.0m/s2, K=1.5m/s2.

The vibration level given in these instructions has been

measured in accordance with a standardised measuring pro-

cedure and may be used to compare power tools. It can also

be used for a preliminary estimation of exposure to vibra-

tion.

The stated vibration level applies to the main applications of

the power tool. However, if the power tool is used for differ-

ent applications, with different application tools or poorly

maintained, the vibration level may differ. This can signific-

antly increase the exposure to vibration over the total work-

ing period.

To estimate the exposure to vibration accurately, the times

when the tool is switched off or when it is running but not ac-

tually being used should also be taken into account. This can

significantly reduce the exposure to vibration over the total

working period.

Implement additional safety measures to protect the oper-

ator from the effects of vibration, such as servicing the

power tool and application tools, keeping the hands warm,

and organising workflows correctly.

Fitting

Charging the battery

uUse only the chargers listed in the technical data. Only

these chargers are matched to the lithium-ion battery of

your power tool.

Note: The battery is supplied partially charged. To ensure

full battery capacity, fully charge the battery in the charger

before using your power tool for the first time.

The lithium-ion battery can be charged at any time without

reducing its service life. Interrupting the charging process

does not damage the battery.

The lithium-ion battery is protected against deep discharge

by the "Electronic Cell Protection (ECP)". When the battery

is discharged, the power tool is switched off by means of a

protective circuit: The application tool no longer rotates.

uDo not continue to press the On/Off switch after the

power tool has automatically switched off. The battery

can be damaged.

Follow the instructions on correct disposal.

1 609 92A 6D6 | (25.06.2021) Bosch Power Tools

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch AdvancedGrind 18 SystemBox Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info