Bedienungsanleitung Bosch AdvancedImpactDrive 18 (Seite 12 von 175) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

766774

Zoom out

Zoom in

Vorherige Seite

1/175

Nächste Seite

12 | English

uAlways wait until the power tool has come to a com-

plete stop before placing it down. The application tool

can jam and cause you to lose control of the power tool.

uIn case of damage and improper use of the battery, va-

pours may be emitted. The battery can set alight or ex-

plode. Ensure the area is well ventilated and seek medical

attention should you experience any adverse effects. The

vapours may irritate the respiratory system.

uDo not open the battery. There is a risk of short-circuit-

ing.

uThe battery can be damaged by pointed objects such

as nails or screwdrivers or by force applied externally.

An internal short circuit may occur, causing the battery to

burn, smoke, explode or overheat.

uOnly use the battery with products from the manufac-

turer. This is the only way in which you can protect the

battery against dangerous overload.

Protect the battery against heat, e.g. against

continuous intense sunlight, fire, dirt, water

and moisture. There is a risk of explosion and

short-circuiting.

Product Description and

Specifications

Read all the safety and general instructions.

Failure to observe the safety and general in-

structions may result in electric shock, fire

and/or serious injury.

Please observe the illustrations at the beginning of this oper-

ating manual.

Intended Use

The machine is intended for driving in and loosening screws

and bolts as well as for tightening and loosening nuts within

the respective range of dimension.

Product features

The numbering of the product features refers to the diagram

of the power tool on the graphics page.

(1) Tool holder

(2) Locking sleeve

(3) Battery release buttonA)

(4) BatteryA)

(5) Rotational direction switch

(6) On/off switch

(7) Handle (insulated gripping surface)

(8) Screwdriver bit with ball catchA)

(9) Screwdriver bitA)

(10) Universal bit holderA)

A) Accessories shown or described are not included with the

product as standard. You can find the complete selection of

accessories in our accessories range.

Technical data

Cordless Impact Wrench AdvancedImpact

Drive 18

Article number 3601J803..

Rated voltage V= 18

No-load speedA) min-1 0–2600

Impact rateA) min-1 0–3200

Maximum torque, hard

screwdriving application ac-

cording to ISO 5393A)

Nm 130

Machine screw diameter mm M4–M14

Max. screw diameter mm 8

Tool holder ¼" internal

hexagon

Weight according to

EPTA-Procedure 01:2014B) kg 1.2–1.5

Recommended ambient tem-

perature during charging °C 0 to +35

Permitted ambient temperat-

ure during operationC) and

during storage

°C –20 to +50

Recommended rechargeable

batteries PBA 18V...W-.

Recommended chargersD) AL 18...

A) Measured at 20−25°C with rechargeable batteryPBA 18V

1.5Ah.

B) Depends on battery in use

C) Limited performance at temperatures <0°C

D) The following chargers are not compatible with the PBA re-

chargeable battery: AL 1814 CV, AL 1820 CV, AL 1860 CV

Noise/vibration information

Noise emission values determined according to

EN62841-2-2.

Typically, the A-weighted noise level of the power tool is:

Sound pressure level 95dB(A); sound power level

106dB(A). Uncertainty K=3dB.

Wear hearing protection!

Vibration total values ah (triax vector sum) and uncertainty K

determined according toEN62841-2-2:

Tightening screws and nuts of the maximum permitted size:

ah=11 m/s2, K=1.5 m/s2

The vibration level and noise emission value given in these

instructions have been measured in accordance with a

standardised measuring procedure and may be used to com-

pare power tools. They may also be used for a preliminary

estimation of vibration and noise emissions.

The stated vibration level and noise emission value repres-

ent the main applications of the power tool. However, if the

power tool is used for other applications, with different ap-

plication tools or is poorly maintained, the vibration level

and noise emission value may differ. This may significantly

1 609 92A 4XB | (17.11.2020) Bosch Power Tools

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch AdvancedImpactDrive 18 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info