Bedienungsanleitung Bosch AdvancedOrbit 18 (Seite 16 von 231) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

707753

Zoom out

Zoom in

Vorherige Seite

1/231

Nächste Seite

16 | English

1 609 92A 4BC | (09.08.2018) Bosch Power Tools

and may be used to compare power tools. They may also be

used for a preliminary estimation of vibration and noise

emissions.

The given vibration level and noise emission value represent

the main applications of the power tool. However, if the

power tool is used for other applications, with different ap-

plication tools or is poorly maintained, the vibration level

and noise emission value may differ. This may significantly

increase the vibration and noise emissions over the total

working period.

To estimate vibration and noise emissions accurately, the

times when the tool is switched off or when it is running but

not actually being used should also be taken into account.

This may significantly reduce vibration and noise emissions

over the total working period.

Implement additional safety measures to protect the oper-

ator from the effects of vibration, such as servicing the

power tool and application tools, keeping the hands warm,

and organising workflows correctly.

Assembly

Charging the Battery

u Use only the chargers listed on the accessories page.

Only these chargers are matched to the lithium-ion bat-

tery of your power tool.

Note: The battery is supplied partially charged. To ensure

full battery capacity, fully charge the battery in the charger

before using your power tool for the first time.

The lithium-ion battery can be charged at any time without

reducing its service life. Interrupting the charging process

does not damage the battery.

The lithium-ion battery is protected against deep discharge

by the "Electronic Cell Protection (ECP)". When the battery

is discharged, the power tool is switched off by means of a

protective circuit: The application tool no longer rotates.

u Do not continue to press the On/Off switch after the

power tool has automatically switched off. The battery

can be damaged.

Follow the instructions on correct disposal.

Removing the Battery (see figure A)

To remove the battery (4), press the release button (8) and

pull the battery back and out of the power tool. Do not use

force to do this.

Battery Charge Indicator (3)

The battery charge indicator on the power tool consists of

three green LEDs. It indicates the battery's state of charge

for a few seconds after the power tool is switched on and off.

LED Capacity

Continuous lighting 3x green ≥ 66%

Continuous lighting 2x green 33–66%

Continuous lighting 1x green 11–33%

Slowly flashing light 1 x green ≤ 10%

The three LEDs in the battery charge indicator flash

quickly when the temperature of the battery is outside

the operating temperature range of –30 to +65 °C and/or

the overload protection has been triggered.

Choosing the Sanding Sheet

Select a sanding sheet with a grit suitable for how much material you want to remove. Bosch sanding sheets are suitable for

paint, wood and metal.

Use Application Grit

Sanding down

(coarse sand-

ing)

– Coarse sanding work with a

high material removal rate

– Removing old paint

– Sanding down old paint, varnish and filler Extra

coarse

– Removing thin paint

– Pre-sanding rough, unplaned surfaces

Coarse 60

Preparing

(intermediate

sanding)

– Light sanding

– Abrading surfaces for further

processing later on

– Sanding uneven surfaces to make them

even

– Removing marks left by coarse sanding

Medium 80

– Repairing surfaces before applying paint or

varnish

Fine 120

Fine sanding

– Intermediate paint sanding

– Abrading flaws in the paintwork

– Removing fibres from the surface

– Fine sanding before staining

Very fine 180

– Abrading primer before painting Extra fine 240

Changing the Sanding Sheet (see figures B–C)

To remove the sanding sheet (10), lift it from the side and

pull it from the sanding pad (6).

Remove dirt and dust from the sanding pad (6), e.g. with a

paintbrush, before attaching a new sanding sheet.

The surface of the sanding pad (6) is fitted with a hook-and-

loop fastening, allowing sanding sheets with a hook-and-loop

backing to be secured quickly and easily.

Press the sanding sheet (10) firmly onto the underside of

the sanding pad (6).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch AdvancedOrbit 18 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info