Bedienungsanleitung Bosch AdvancedRotak 750 (Seite 12 von 247) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

707767

Zoom out

Zoom in

Vorherige Seite

1/247

Nächste Seite

12 | English

F 016 L81 572 | (6.11.17) Bosch Power Tools

Use extreme caution when stepping

back or pulling the machine towards

you.

Never mow by pulling the mower to-

wards you.

Wait until the blades stop if the ma-

chine has to be tilted for transporta-

tion when crossing surfaces other

than grass and when transporting the

machine to and from the area to be

mowed.

Do not tilt the machine when starting

or switching on the motor.

Switch on the motor according to the

instructions with feet well away from

rotating parts.

Do not put hands or feet near or un-

der rotating parts.

Always stand clear of the discharge

zone when operating the machine.

Never pick up or carry the machine

while the motor is running.

Do not modify this product. Unau-

thorized modifications may impair

the safety of your product and may

result in increased noise and vibra-

tion.

Regularly inspect the supply cable

and any extension cables. Do not con-

nect damaged cables to the supply or

touch a damaged cable before it is

disconnected from the supply. A

damaged cable can lead to contact

with live parts. Beware electric shock

hazard.

Leaf Collect

The leaf collect blade has been de-

signed to allow you to pick up autumn

leaves from your lawn. In order for this

functionality to work within optimal pa-

rameters, please note the following:

– only collect leaves with the machine

set at 70 mm cutting hight

– collect leaves from your lawn only

– before collecting leaves inspect the

area where the machine is to be used

and keep people, pets, glass struc-

tures and cars away from use

Remove the plug from the socket:

– Whenever you leave the machine.

– before clearing a blockage,

– before checking, cleaning or working

on the machine,

– after striking a foreign object. Inspect

the machine for damage and make re-

pairs as necessary,

– if the machine starts to vibrate abnor-

mally (check immediately).

Connecting to the mains

The voltage indicated on the rating

plate must correspond to the voltage

of the power source.

We recommend that this equipment

is only connected into a socket which

is protected by a circuit-breaker that

would be actuated by a 30 mA residu-

al current.

Only use or replace power supply ca-

bles for this unit which correspond to

the types indicated by the manufac-

turer. See the operating instructions

for the order no. and types.

Never touch the mains plug with wet

hands.

Do not run over, crush or pull the

power supply cord or extension cord,

otherwise it may be damaged. Pro-

OBJ_BUCH-3146-001.book Page 12 Monday, November 6, 2017 1:02 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch AdvancedRotak 750 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info