Bedienungsanleitung Bosch AdvancedVac18V 8 (Seite 13 von 114) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

766885

Zoom out

Zoom in

Vorherige Seite

1/114

Nächste Seite

English | 13

Bosch Power Tools 1 609 92A 43U | (6.9.17)

Extraction of dust resulting from running power tools

(see figure D)

A socket outlet with earthing contact 4 is integrated in the

vacuum cleaner. An external power tool can be connected

there. Observe the maximal allowable load of the connected

power tool.

– Fit the extraction adapter 12 (see “Fitting the extraction

adapter or curved nozzle”, page 12).

– Insert the extraction adapter 12 into the dust extraction

outlet for the power tool.

Note: When working with power tools that have a low air feed

into the vacuum hose (e.g. jigsaws, sanders, etc.), the air dif-

fuser 20 of the vacuum hose 10 must be opened. This will im-

prove the total output of the vacuum cleaner and the power

tool.

To do so, turn the ring above the air diffuser 20 until the max-

imum opening is produced.

–To start the operation of the vac, switch on the power tool

connected to the socket 4. The vacuum cleaner starts au-

tomatically.

– Switch the power tool off to end the vacuuming.

The delayed action shutdown of the Automatic Start/Stop

continues to run for up to 6 seconds in order to extract re-

sidual dust from the vacuum hose.

Maintenance and Service

Maintenance and Cleaning

Before any work on the vacuum cleaner itself, pull the

mains plug.

For safe and proper working, always keep the vacuum

cleaner and ventilation slots clean.

If the replacement of the supply cord is necessary, this has to

be done by Bosch or an authorized Bosch service agent in or-

der to avoid a safety hazard.

Cleaning the Filter Assembly (see figures E1–E3)

– Press the release button 8 and pull the dust cup 9 out of

the vacuum cleaner.

– Remove the fabric filter 21 along with its filter basket and

brush down the fabric filter with a soft brush.

– Grasp the flat-fold filter 22 by the bars and remove it to-

gether with its filter basket.

Brush down the flat-fold filter using a soft brush or rinse it

out under running water and leave it to dry thoroughly.

– Re-insert the cleaned filters, ensuring that they are seated

correctly and securely.

Cleaning the Dust Cup

–Wipe the dust cup 9 from time to time using conventional,

non-abrasive detergent and then leave it to dry thoroughly.

Cleaning the permanent filter (see figure F)

Clean the permanent filter 24 from time to time in order to en-

sure that the vacuum cleaner continues to perform optimally.

– Open the exhaust air cover 23 and remove the permanent

filter 24.

– Rinse out the permanent filter 24 under running water and

then leave it to dry thoroughly.

– Re-insert the cleaned filter, ensuring that it is seated cor-

rectly and securely. Close the exhaust air cover again.

Malfunctions

In the case of insufficient vacuuming performance, check the

following:

– Is the hose system clogged?

– Are the filters clogged with dust?

– Is the dust cup 9 full?

– Is the dust bag 18 full?

The vacuum cleaner switches off on overheating. Proceed as

follows:

– Leave the vacuum cleaner to cool down for 60 min.

– Briefly remove the mains plug from the socket and then re-

insert it.

– Make sure that the container 9 and dust bag 18 are empty

and that the vacuum hose 10, filter 21/22 and permanent

filter 24 are not blocked.

Emptying at regular intervals ensures optimum vacuuming

performance.

If the vacuuming performance is not achieved thereafter, take

the vacuum cleaner to customer service.

Storage (see figure G)

– Open the elastic bands of the vacuum-hose holder 1 and

wrap the vacuum hose 10 around the vacuum cleaner.

Hook the elastic bands back in.

– Put the vacuuming accessories in the bracket 6 provided

for this purpose on the vacuum cleaner.

– Wind the mains cable around the cable holder 3.

– Carry the vacuum cleaner only by the carrying handle 5.

After-sales Service and Application Service

Our after-sales service responds to your questions concern-

ing maintenance and repair of your product as well as spare

parts. Exploded views and information on spare parts can al-

so be found under:

www.bosch-pt.com

Bosch’s application service team will gladly answer questions

concerning our products and their accessories.

In all correspondence and spare parts orders, please always

include the 10-digit article number given on the nameplate of

the product.

Great Britain

Robert Bosch Ltd. (B.S.C.)

P.O. Box 98

Broadwater Park

North Orbital Road

Denham

Uxbridge

UB 9 5HJ

–To activate the automatic

start/stop of the vacuum cleaner, set

the mode selector switch 2 to the

“Automatic Start/Stop” symbol.

–To switch off the vacuum cleaner, set the

mode selector switch 2 to the “Off” symbol.

OBJ_BUCH-2992-002.book Page 13 Wednesday, September 6, 2017 11:43 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch AdvancedVac18V 8 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info