Bedienungsanleitung Bosch AHM 38 G (Seite 8 von 43) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

777040

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

EURO • Printed in England • BA F 016 L69 768 • AHM 30/38 • GB • OSW 02/01

English - 2

F016 L69 768 • TMS • 12.00

Coarse:

The roller brackets

should be set in one of three

positions according to the type of lawn:

for high

range for bumpy lawns,

for medium range for av-

erage lawns and

III

fore low range for reasonably

flat lawns. You should only need to make this adjust-

ment once, thereafter use the „Fine“ adjustment to

cut longer or shorter grass.

To change the height of cut:

1. Remove the wingnut

and bolt.

2. Reposition the bolt for required height of cut.

3. Refit wingnut

Fine (X):

Slacken wing nut

on both sides of the mower.

Move both roller brackets

equally to the required

height of cut.

For best results, place the lawnmower on the edge

of lawn, mow in a forwards direction. Reverse at the

end of the each turn, slightly overlapping the previ-

ous cut strip.

Note: To ensure long and reliable service, carry out

the following maintenance regularly.

Regularly check for obvious defects such as loose,

dislodged or damaged blades, loose fixings, and

worn or damaged components.

Check that covers and guards are undamaged and

correctly fitted. Carry out necessary maintenance or

repairs before using.

If the mower should happen to fail despite the care

taken in manufacture and testing, repair should be

carried out by an authorised customer service agent

for Bosch garden products.

For all correspondence and spare parts orders, al-

ways include the 10-digit part number from the

nameplate of the machine!

The cutting cylinder should be adjusted if the grass

is not cut cleanly and evenly.

Turn both adjuster knobs

clockwise a little at time

until the cutting cylinder

lightly brushes the bottom

blade

Note: The blades act like a pair of shears.

Grassbox AHM 30/38C ..................0 600 886 060

Grassbox AHM 30/38C ..................0 600 886 160

Clean the exterior of the machine thoroughly using a

soft brush and cloth. Do not use water, solvents or

polishes. Remove all grass and debris.

Turn the machine on its side and clean the blade

area. If grass cuttings are compacted in the blade

area, remove with a wooden or plastic implement.

Store the lawnmower in a dry place. Do not place

other objects on top of the machine.

We guarantee Bosch appliances in accordance with

statutory/country-specific regulations (proof of pur-

chase by invoice or delivery note).

Damage attributable to normal wear and tear, over-

load or improper handling will be excluded from the

guarantee.

In case of complaint please send the machine,

un-

dismantled

, to your dealer or the Bosch Service

Centre for lawn and garden products.

Adjusting the Cutting Height

Mowing

Maintenance

Adjusting the Blade

Accessories

After Mowing/Storage

Guarantee

F016 L69 768.book Seite 2 Dienstag, 20. Februar 2001 11:44 11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch AHM 38 G Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info