Bedienungsanleitung Bosch AHS 41 (Seite 13 von 71) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

78545

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

English - 3

A battery that is new or has not been used for a

longer period does not develop its full capacity until

after approximately 5 charging/discharging cycles.

Leave such batteries in the charging compartment

until they have clearly warmed up.

A significantly reduced working period after charging

indicates that the batteries are used and must be re-

placed.

Fit the battery. A click is heard when the battery cor-

rectly fitted.

Release the battery by pressing the unlocking but-

ton

on both sides, and pull downwards and out of

the machine.

Starting:

Press and hold rear switch lever

. Squeeze front le-

ver

Stopping:

Release any of switch levers

and

Hold the hedgecutter away from yourself

using both hands. Stand in a secure and

stable position.

Cuts stems up to 15 mm in thickness. When cutting,

move steadily along the line of cut, so that stems are

fed directly into the cutter blades. The double edge

cutting blade enables cutting in either direction, or

with a side to side motion.

Cut the sides of the hedge first, then the top.

To keep the sides flat, cutting upwards with the

growth is recommended. Younger stems tend to

move outwards when cutting them from top to bot-

tom, resulting in shallow patches or holes in the

hedge.

To reach a level finish, fasten a piece of string along

the length of the hedge at the required height and

use as an alignment guide. Cut the hedge just above

the string.

In order to encourage strong healthy growth of your

hedge, it is recommended when trimming the top, to

use the Collecto “clippings-collection” accessory.

This accessory cleverly gathers the clippings as you

cut, allowing them to be easily tipped into a bag or

sheet placed alongside the hedge, and thus prevent-

ing the dead clippings from falling into the hedge.

Always take care to avoid cutting into objects such

as wire, which could cause damage to the cutting

blades and the drive.

Before any work on the machine itself, re-

move battery from machine.

Note: To ensure long and reliable service, carry out

the following maintenance regularly.

Check for obvious defects such as loose, dislodged

or damaged blade, loose fixings and worn or dam-

aged components.

Check that covers and guards are undamaged and

correctly fitted. Carry out necessary maintenance or

repairs before using.

If the hedgecutter should happen to fail despite the

care taken in manufacturing and testing, repair

should be carried out by an authorized customer

service agent for Bosch garden products.

For all correspondence and spare parts orders, al-

ways include the 10-digit part number (TYP) from

the nameplate of the machine!

Before any work on the machine itself, re-

move battery from machine.

Wear gloves when handling or cleaning the cutting

blade.

Always clean the cutting blade after operation and

lubricate with protective spray. During longer cutting

jobs, we recommend periodically lubricating the cut-

ting blade with protective spray.

Visually check the condition of the cutting edges of

the cutting blade

. Check tightness of blade bolts.

Ensure that the blade is covered with the blade

guard

supplied.

Remove the battery from the machine during stor-

age. Take care not to short the battery terminals with

metallic objects.

Clean the exterior of the machine thoroughly using a

soft brush and cloth. Do not use water, solvents or

polishes. Remove all debris, especially from the

ventilation slots

Always lubricate the cutting blade with protective

spray before storage.

Store the hedgecutter in a secure, dry place out of

the reach of children. Do not place other objects on

top of the machine.

Assembly

Starting and Stopping

Tips on Cutting

C D E

Maintenance

Blade Maintenance

Cleaning/Storage

2 609 932 402 - GB Seite 3 Dienstag, 13. April 2004 4:05 16

13 • 2 609 932 402 • TMS • 13.04.04

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch AHS 41 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info