Bedienungsanleitung Bosch AHS 48-16 (Seite 10 von 70) (Holländisch)

1109

Zoom out

Zoom in

Vorherige Seite

1/70

Nächste Seite

English - 2

10 • F016 L70 369 • TMS • 22.11.05

The product is intended for cutting and trimming

hedges and bushes in domestic use.

This manual gives instructions on the correct as-

sembly and safe use of your hedgecutter. It is impor-

tant that you read these instructions carefully.

Carefully remove the machine from its packaging

and check for complete contents:

– Hedgecutter

– Blade guard

– Front handle guard

– Two screws

– Operating instructions

When parts are missing or damaged, please contact your

dealer.

1 Cutting blade

2 Front handle guard

3 Front handle switch levers

4 Rear handle with switch lever

5 Ventilation slots

6 Mains plug**

7 Blade guard

**Country specific

Not all of the accessories illustrated or described are

included as standard delivery.

Electrical Safety

Your machine is double insulated for safety and re-

quires no earth connection. The operating voltage is

230 V AC, 50 Hz (for non-EU countries 220 V, 240 V

as applicable). Only use approved extension cables.

Contact your Bosch Service Center for details.

Extension cords/leads should only be used if they

comply with H05VV-F or H05RN-F types.

It is recommended for increased electrical safety to

use a Residual Current Device (RCD) with a tripping

current of not more than 30 mA. Always check your

RCD every time you use it.

For products not sold in GB: WARNING: For

safety, it is essential that the mains plug 6 attached

to the machine is fitted to the power supply cable 9

as shown.

The couplings of connection leads must be pro-

tected against splashes and the coupling sockets on

the leads must be made of rubber or coated with

rubber.

Fixing means for the connection leads must be used.

The connection lead must be inspected for signs of

damage at regular intervals and may only be used if

in perfect condition.

If the supply cord is damaged, it must be replaced by

a Bosch Service Centre.

Products sold in GB only: Your hedecutter is fitted

with an approved 13 A (BS 1363/A) electric plug and

is protected by a 13 A fuse (ASTA Approved to

BS 1362).

If the fitted plug is not suitable for your socket outlets,

it should be cut off and an appropriate plug fitted in its

place by an authorized customer service agent.

The severed plug must be disposed of to avoid a

possible shock hazard and should never be inserted

into a 13 A socket elsewhere.

Product Specification

Hedgecutter AHS 4-16 AHS 42-16 AHS 48-16 AHS 52-16 AHS 63-16 C

Part number (TYP) 3 600 H47 0.. 3 600 H47 1.. 3 600 H47 2.. 3 600 H47 4.. 3 600 H47 5..

Rated power [W] 390 420 420 420 420

No-load stroke rate [spm] 1 600 1 600 1 600 1 600 1 600

Cutting length [mm] 420 420 480 520 630

Weight [kg] 2.7 2.7 2.8 2.8 2.9

Protection class / II / II / II / II / II

Intended Use

Introduction

Delivered Items

Operating Controls

For Your Safety

Warning! Switch off, remove plug from mains

before adjusting, cleaning or if cable is cut,

damaged or entangled.

The blades continue to move for a few sec-

onds after the hedgecutter is switched off.

Caution! Do not touch the moving blades.

F016 L70 369 - GB Seite 2 Dienstag, 22. November 2005 5:35 17

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch AHS 48-16 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch AHS 48-16

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info