Bedienungsanleitung Bosch AHS 650-24 ST (Seite 11 von 70) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

1123

Zoom out

Zoom in

Vorherige Seite

1/70

Nächste Seite

English - 3

It is recommended for increased electrical safety to

use a Residual Current Device (RCD) with a tripping

current of not more than 30 mA. Always check your

RCD every time you use it.

For products

not sold in GB

: WARNING: For safety,

it is essential that the mains plug

attached to the

machine is fitted to the power supply cable

shown.

The couplings of connection leads must be pro-

tected against splashes and the coupling sockets on

the leads must be made of rubber or coated with rub-

ber.

Fixing means for the connection leads must be used.

The connection lead must be inspected for signs of

damage at regular intervals and may only be used if

in perfect condition.

If the supply cord is damaged, it must be replaced by

a Bosch Service Center.

Products sold in

only: Your hedgecutter is fitted

with an approved 13 A (BS 1363/A) electric plug and

is protected by a 13 A fuse (ASTA Approved to

BS 1362).

If the fitted plug is not suitable for your socket out-

lets, it should be cut off and an appropriate plug fitted

in its place.

The severed plug must be disposed of to avoid a

possible shock hazard and should never be inserted

into a 13 A socket elsewhere.

Starting:

Press and hold rear switch lever

. Squeeze any

front lever

Stopping:

Release any of switch levers

and

Hold the hedgecutter away from yourself

using both hands. Stand in a secure and

stable position.

Position the extension cord over your shoulder to the

rear and ensure that the cord is behind you at all

times during cutting. Never place the cable over the

hedge, where it could easily be cut by the blades.

Cut stems up to 24 mm (34 mm AHS 6000/7000

PRO-T) in thickness. When cutting, move steadily

along the line of cut, so that stems are fed directly

into the cutter blades. The double edge of the cutting

blade enables cutting to either direction, or with a

side to side motion.

Cut the sides of the hedge first, then the top.

To keep the sides flat, cutting upwards with the

growth is recommended. Younger stems tend to

move outwards when cutting them from top to bot-

tom, resulting in shallow patches or holes in the

hedge.

To reach a level finish, fasten a piece of string along

the length of the hedge at the required height and

use as an alignment guide. Cut the hedge just above

the string.

Take care to avoid cutting into objects such as wire,

which could cause damage to the cutting blades and

the drive.

Recommended cutting/trimming times:

– Cut hedges with deciduous leaves in June and

October.

– Cut evergreen hedges in April and August.

– Cut conifer and other fast growing shrubs approx.

every six weeks from May onwards.

– Shaping hedges should be cut to achieve a form

as shown in figure.

Prior to any maintenance remove plug

from power supply.

Note: To ensure long and reliable service, carry out

the following maintenance regularly.

Check for obvious defects such as loose, dislodged

or damaged blade, loose fixings and worn or dam-

aged components.

Check that covers and guards are undamaged and

correctly fitted. Carry out necessary maintenance or

repairs before using.

If the hedgecutter should happen to fail despite the

care taken in manufacturing and testing, repair

should be carried out by an authorized customer

service agent for Bosch garden products.

For all correspondence and spare parts orders, al-

ways include the 10-digit part number (typ) from the

nameplate of the machine!

Starting and Stopping

Tips on Cutting

B C D

Maintenance

11 • 2 609 932 392 • 04.01

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch AHS 650-24 ST Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info