Bedienungsanleitung Bosch AHS EASICUT (Seite 11 von 69) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

473361

Zoom out

Zoom in

Vorherige Seite

1/69

Nächste Seite

English - 3

Hold the hedgecutter away from yourself

using both hands. Stand in a secure and

stable position.

Position the extension cord over your shoulder to the

rear and ensure that the cord is behind you at all

times during cutting. Never place the cable over the

hedge, where it could easily be cut by the blades.

Cut stems upto 24 mm in thickness. When cutting,

move steadily along the line of cut, so that stems are

fed directly into the cutter blades. The double edge

of the cutting blade enables cutting to either direc-

tion, or with a side to side motion.

Cut the sides of the hedge first, then the top.

To keep the sides flat, cutting upwards with the

growth is recommended. Younger stems tend to

move outwards when cutting them from top to bot-

tom, resulting in shallow patches or holes in the

hedge.

To reach a level finish, fasten a piece of string along

the length of the hedge at the required height and

use as an alignment guide. Cut the hedge just above

the string.

Take care to avoid cutting into objects such as wire,

which could cause damage to the cutting blades and

the drive.

Recommended cutting/trimming times:

– Cut hedges with deciduous leaves in June and

October.

– Cut evergreen hedges in April and August.

– Cut conifer and other fast growing shrubs approx.

every six weeks from May onwards.

– Shaping hedges should be cut to achieve a form

as shown in figure.

Prior to any maintenance remove plug

from power supply.

Note: To ensure long and reliable service, carry out

the following maintenance regularly.

Check for obvious defects such as loose, dislodged

or damaged blade, loose fixings and worn or dam-

aged components.

Check that covers and guards are undamaged and

correctly fitted. Carry out necessary maintenance or

repairs before using.

If the hedgecutter should happen to fail despite the

care taken in manufacturing and testing, repair

should be carried out by an authorized customer

service agent for Bosch garden products.

For all correspondence and spare parts orders, al-

ways include the 10-digit part number from the

nameplate of the machine!

Prior to any maintenance remove plug

from power supply.

Wear gloves when handling or cleaning the cutting

blade.

Always clean the cutting blade after operation and

lubricate with protective spray. During longer cutting

jobs, we recommend periodically lubricating the cut-

ting blade with protective spray.

Visually check the condition of the cutting edges of

the cutting blade 1. Check tightness of blade bolts.

Ensure that the blade is covered with the blade

guard 7 supplied.

Clean the exterior of the machine thoroughly using a

soft brush and cloth. Do not use water, solvents or

polishes. Remove all debris, especially from the

ventilation slots 4.

Store the hedgecutter in a secure, dry place out of

the reach of children. Do not place other objects on

top of the machine.

Blade guard....................................... 2 605 911 160

Lubricant spray ................................. 1 609 200 399

Clipping sheet ...................................F 016 800 055

Tips on Cutting

Maintenance

B C D

Blade Maintenance

Cleaning/Storage

Accessories

11 • 2 609 932 176 • TMS • 11.02.02

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch AHS EASICUT Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info