Bedienungsanleitung Bosch AKE 30-19S (Seite 17 von 153) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

78568

Zoom out

Zoom in

Vorherige Seite

1/153

Nächste Seite

English - 17

17 • F016 L70 506 • TMS • 19.10.07

WARNING! Read all safety warnings and all instruc-

tions. Failure to follow the warnings and instructions

may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future refer-

ence.

The term “power tool” in the warnings refers to your

mains operated (corded) power tool.

It is recommended that the first time user should have

practical instruction in the use of the chainsaw and the

protective equipment from an experienced operator and

that the initial practice should be cutting logs on a saw

horse or cradle.

Explanation of symbols:

Read instruction manual.

Do not expose to rain.

Remove the plug from the socket or mains im-

mediately before carrying out any adjustments,

servicing or maintenance or if the cable is dam-

aged or cut.

Obtain and wear eye and ear protection at all

times while operating the power tool.

The kick back brake and the run down

brake stop the chain saw within short

time.

Work area

■ Keep work area clean and well lit. Cluttered and

dark areas invite accidents.

■ Do not operate power tools in explosive atmos-

pheres, such as in the presence of flammable liq-

uids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

■ Keep children and bystanders away while operat-

ing a power tool. Distractions can cause you to lose

control.

■ Children and juveniles, except above age 16, un-

der supervision and for educational purposes,

must not operate the chain saw, nor should per-

sons unfamiliar with the saw or its handling

(when borrowing). Ensure operation manual is with

the saw. Persons unfit or tired must not operate the

chain saw.

Electrical safety

■ Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will re-

duce risk of electric shock.

■ Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

■ Do not expose power tools to rain or wet condi-

tions. Water entering a power tool will increase the

risk of electric shock.

■ Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords in-

crease the risk of electric shock.

■ When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a

cord suitable for outdoor use reduces the risk of elec-

tric shock.

■ If operating a power tool in a damp location is un-

avoidable, use a residual current device (RCD)

protected supply. Use of an RCD reduces the risk

of electric shock.

Personal safety

■ Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the influence of drugs, alcohol or medication. A

moment of inattention while operating power tools

may result in serious personal injury.

■ Use personal protective equipment. Always wear

eye protection. Protective equipment such as dust

masks, non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will reduce

personal injuries.

■ Prevent accidental starting. Ensure the switch is

in the off position before plugging in. Carrying

power tools with your finger on the switch or plugging

in power tools that have the switch on invites acci-

dents.

■ Remove any adjusting key or wrench before turn-

ing the power tool on. A wrench or a key left at-

tached to a rotating part of the power tool may result

in personal injury.

■ Do not overreach. Keep proper footing and bal-

ance at all times. This enables better control of the

power tool in unexpected situations.

■ Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves

away from moving parts. Loose clothes, jewellery

or long hair can be caught in moving parts.

■ If devices are provided for the connection of dust

extraction and collection facilities, ensure these

are connected and properly used. Use of these

devices can reduce dust-related hazards.

Power tool use and care

■ Do not force the power tool. Use the correct

power tool for your application. The correct power

tool will do the job better and safer at the rate for

which it was designed.

■ Do not use the power tool if the switch does not

turn it on and off. Any power tool that cannot be

controlled with the switch is dangerous and must be

repaired.

■ Disconnect the plug from the power source be-

fore making any adjustments, changing accesso-

ries, or storing power tools. Such preventive

safety measures reduce the risk of starting the power

tool accidentally.

Safety Notes

F016 L70 506 - GB Seite 17 Dienstag, 23. Oktober 2007 3:20 15

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch AKE 30-19S Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch AKE 30-19S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info