697454
81
Zoom out
Zoom in
Vorherige Seite
1/170
Nächste Seite
AMAX panel Settings | en 81
Bosch Security Systems B.V. Installation Manual 2019.08 | 11 | F.01U.309.277
Notice!
Please note that this function can only be accessed and programmed via the remote
programming software A-Link Plus.
How to program a schedule
1. Select the function you want to schedule. The following function can be selected:
Arm (up to 16 areas)
Disarm (up to 16 areas)
Switch on output (up to 20 outputs)
Switch off output (up to 20 outputs)
Activate user (up to 250 users)
Deactivate user (up to 250 users)
2. Enter the desired start time (hh:mm) and the date (dd/mm) for the schedule.
3. Choose the selected days for the schedule (yes/no for each weekday).
4. Optionally select a exception (e.g. for holidays)
P The schedule is programmed and can be enabled/disabled by the user.
6.5.2 System view
Fault analysis
This option display faults, tampers and the bypass/isolate status. The AMAX panel can display
eight categories of 41 types of system faults and tampers.
How to display faults and tampers via a text keypad
In a text keypad the faults and tampers are displayed directly.
How to display faults and tampers via a master keypad
In a master keypad the system faults and tampers are displayed directly. After an area is
selected, the area-specific faults and tampers are displayed.
How to display the bypass status
1. Enter your code + [3] [3] and press [#].
The system beeps twice and the bypassed zones are displayed.
2. Use [] and [] to display all bypassed zones.
3. Press [#] to exit.
How to display the isolate status
1. Enter your code + [3] [6] and press [#].
The system beeps twice and the isolated zones are displayed.
2. Use [] and [] to display all isolated zones.
3. Press [#] to exit.
How to display faults and tampers via a LED/LCD keypad
1. Enter your code + [2] [1] and press [#].
The system beeps twice. The FAULT indicator is extinguished and the STAY and AWAY
indicators flash. One of the number indicators is lit. Example: 2.
2. Enter the number that is lit in the system. Example: 2.
One of the number indicators is lit. Example: 1.
3. Repeat step 2 until there is no number lit anymore.
4. Refer to the table Types of fault or tamper conditions for a description of the fault or
temper. The consecutively lit number indicators correspond to fault or tamper types.
Example: 2 – 1, which indicates a panel AC failure.
5. If necessary press [0] to return to step 2.
6. Press [#] to exit.
81

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bosch AMAX panel 4000 EN wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Bosch AMAX panel 4000 EN

Bosch AMAX panel 4000 EN Kurzanleitung - Deutsch - 76 seiten

Bosch AMAX panel 4000 EN Kurzanleitung - Holländisch - 76 seiten

Bosch AMAX panel 4000 EN Installationsanweisung - Holländisch - 190 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info