697454
94
Zoom out
Zoom in
Vorherige Seite
1/170
Nächste Seite
94 en | Configuration AMAX panel
2019.08 | 11 | F.01U.309.277 Installation Manual Bosch Security Systems B.V.
7 Configuration
This chapter describes how to configure the settings of the AMAX panel. The settings can be
configured either via a text keypad or via the remote programming software A-Link Plus.
4 For detailed description of the settings, refer to Settings, page 30.
7.1 Service mode
During configuration and programming of the system, the service mode can be used. If the
system is modified during service mode, there won’t be any alarms triggered.
Service mode expiry time
The service mode expiry time defines the time for how long the service mode will be active.
Possible values are 0 - 999.
If 000 is entered, the service mode won’t be enabled.
If 999 is entered, the service mode will stay on until it is disabled.
Service mode configuration
The service mode configurations can be set via a text keypad or via A-Link Plus.
Reports can be enabled or disabled for the service mode.
Triggering outputs can be enabled or disabled for the service mode.
The keypad buzzer can be enabled or disabled for the service mode.
How to enable the service mode on a text keypad
1. Enter the installer code + [73] and press [#].
2. Enter the service mode expiration time in minutes. Default: 999.
3. Enable or disable the service mode report.
4. Enable or disable the service mode output.
5. Enable or disable the service mode keypad buzzer.
P The system is in service mode and the triangle LED is lit.
How to disable the service mode on a text keypad
The service mode only has to be disabled if it has been enabled before.
1. Enter the installer code + [73] and press [#].
2. The system is in normal mode and the triangle LED is off.
7.2 Programming with a keypad
7.2.1 Text keypad programming
Access to the Menus
Accessing the programming menu
1. Confirm that the system is disarmed and that no alarm occurred.
2. Enter the installer code. The default setting for the installer code is [1234].
The system displays [958] PROGR. MODE [-EXIT].
3. Enter [958] + press [#].
P You have now access to the programming menu for configuring the AMAX system.
P The STAY and AWAY indicators flash to indicate the programming mode.
Accessing the user menu
4 Enter a user code. The default users are master user 1 (code: [2580]) and master user 2
(code: [2581]).
P The system displays [/] USER MENU *STAY #AWAY [-] INFO.
P You have now access to the user menu for operating the AMAX system.
94

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bosch AMAX panel 4000 EN wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Bosch AMAX panel 4000 EN

Bosch AMAX panel 4000 EN Kurzanleitung - Deutsch - 76 seiten

Bosch AMAX panel 4000 EN Kurzanleitung - Holländisch - 76 seiten

Bosch AMAX panel 4000 EN Installationsanweisung - Holländisch - 190 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info