Bedienungsanleitung Bosch Aquatak 100 Compact (Seite 14 von 86) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

79212

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

EURO • Printed in England • BA F016 L69 835 • AQUATAK 100 • GB • OSW 09/01

English - 3

Electrical Safety

Your machine is double insulated for safety and re-

quires no earth connection. The operating voltage is

230 V AC, 50 Hz. Only use approved extension ca-

bles. Contact your Bosch Service Center for details.

If you want to use an extension cable when operat-

ing your high pressure washer, only the following ca-

ble dimensions should be used:

1.5 mm

- max length 20 m

2.5 mm

- max length 50 m

Note: If an extension cable is used it must be

earthed and connected through the plug to the earth

cable of your supply network in accordance with pre-

scribed safety regulations.

If in doubt contact a qualified electrician or the near-

est Bosch Service Center.

WARNING! Inadequate extension cables can be

dangerous. Extension cable, plug and socket

must be of watertight construction and intended

for outdoor use.

Cable connections should be kept dry and off

ground.

It is recommended for increased electrical safety to

use a Residual Current Device (RCD) with a tripping

current of not more than 30 mA. Always check your

RCD every time you use it.

For products not sold in GB: WARNING: For

safety, it is essential that the mains plug 6 attached

to the machine is fitted to the power supply cable .

The couplings of connection leads must be pro-

tected against splashes and the coupling sockets on

the leads must be made of rubber or coated with

rubber. Fixing means for the connection leads must

be used.

If the supply cord is damaged, it must be replaced by

a Bosch Service Center.

Products sold in GB only: Your mower is fitted with

an approved 13 A (BS 1363/A) electric plug and is

protected by a 13 A fuse (ASTA Approved to

BS 1362).

If the fitted plug is not suitable for your socket out-

lets, it should be cut off and an appropriate plug fit-

ted in its place.

The severed plug must be disposed of to avoid a

possible shock hazard and should never be inserted

into a 13 A socket elsewhere.

Water connection

Screw connector 7 onto machine water inlet connec-

tion 8. (see figure )

Attach water supply hose (not supplied) to the mains

water supply and machine. (see figure / )

Connecting high pressure water supply hose/

nozzle

Securely screw high pressure hose 9 onto machine

at connection 10. (see figure )

Inserting the extension lance 5 into the power gun 4.

Depress and turn the extension lance 5 90° clock-

wise to lock in place. (see figure )

Inserting the Jet-fan nozzle 11 into the extension

lance 5 and turn the Jet-fan nozzle 11 clockwise un-

til it “clicks”, it is now locked in place. (see figure )

Jet-fan nozzle (pink colour coded)

Twist the nozzle sleeve to adjust from a pencil to a

fan jet and vice versa. (see figure )

Detergent nozzle and bottle

Turning the extension lance 5 90° anti-clockwise.

Extract the extension lance 5. (see figure )

Inserting the detergent-nozzle 12 into the power

gun 4. Depress and turn the detergent-nozzle 90°

clockwise to lock in place. (see figure )

Roto nozzle (pink colour coded)

Turn the Jet-fan nozzle 11 anti-clockwise to extract

it from the extension lance 5. (see figure )

Inserting the Roto nozzle 13 into the extension

lance 5 and turn the Roto nozzle 13 clockwise until

it “clicks”, it is now locked in place. (see figure )

Starting

Open water tap.

Press the safety lock 1 to release the trigger 2. Fully

press the trigger 2 until there is a constant flow of

water. Release trigger 2. Press the trigger safety

lock. (see figure )

Press button ( ) on the main switch 3.

For Your Safety

Warning! Switch off, remove plug from mains

before adjusting, cleaning or if cable is cut,

damaged or entangled.

Assembly

Adjustments and using different

nozzles

Starting and Stopping

F016 L69 835.book Seite 3 Donnerstag, 6. September 2001 12:56 12

14 • F016 L69 835 • TMS • 21.08.01

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch Aquatak 100 Compact Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info