Bedienungsanleitung Bosch Aquatak 115 Plus Comfort (Seite 14 von 91) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

79214

Zoom out

Zoom in

Vorherige Seite

1/91

Nächste Seite

English - 2

14 • F016 L70 372 • TMS • 15.09.05

The product is intended for cleaning areas and objects

outside the house, tools, vehicles and boats. Drainage

pipes can be unclogged and rust or paint coatings can

be removed, if the appropriate accessories such as

cleaning agents approved by Bosch are used.

Intended Use is related to operation within 0 °C and

40 °C ambient temperature.

This product should not be used for professional

use.

This manual gives instructions on the correct as-

sembly and safe use of your machine. It is important

that you read these instructions carefully.

When fully assembled the machine weighs approxi-

mately 7.0 kg. If necessary, obtain assistance to re-

move from packaging.

Carefully remove the machine from its packaging

and check that you have all the following items:

– Power washer

– Power gun/high pressure hose

– Detergent nozzle and bottle

(AQUATAK 110 only)

– Vario-jet-fan power lance (red colour coded)

– Roto power lance (red colour coded)

– Inlet Connector

– Wash Brush

(AQUATAK 110 PLUS/115 PLUS only)

– Operating instructions

When parts are missing or damaged, please contact your

dealer.

1 Trigger safety lock

2 Trigger

3 Power gun

4 Vario-jet-fan power lance

5 High pressure hose

6 Detergent nozzle and bottle

(AQUATAK 110 only)

7 Roto power lance

8 Inlet Connector

9 Detergent Tank

(AQUATAK 110 PLUS/115 PLUS only)

10 Main switch

11 Serial Number

Not all of the accessories illustrated or described are

included as standard delivery.

Electrical Safety

Your machine is double insulated for safety and re-

quires no earth connection. The operating voltage is

230 V AC, 50 Hz (for non-EU countries 220 V, 240 V

as applicable). Only use approved extension cables.

Contact your Bosch Service Centre for details.

If you want to use an extension cable when operat-

ing your high pressure washer, only the following ca-

ble dimensions should be used:

1.5 mm

– max length 20 m

2.5 mm

– max length 50 m

Product Specification

Power washer AQUATAK 110 AQUATAK 110 PLUS AQUATAK 115 PLUS

Part number 3 600 H76 C.. 3 600 H76 D.. 3 600 H76 E..

Rated power [W] 1 600 1 600 1 700

Supply Temperature max. [°C] 40 40 40

Supply rate min. [l/h] 17 17 17

Supply pressure max. [bar] 1.5 – 6.0 1.5 – 6.0 1.5 – 6.0

Working pressure [bar] 100 100 105

Max. Operating pressure [bar] 110 110 115

Flow rate [l/h] 360 380 380

Detergent Bottle or Tank Bottle Tank Tank

Detergent capacity [l] 0.5 0.75 0.75

Weight [kg] 7.0 7.0 7.0

Protection class / II / II / II

Serial Number See serial No 11 (rating plate) on product.

Intended Use

Introduction

Delivered Items

Operating Controls

For Your Safety

Warning! Switch off, remove plug from mains

before adjusting, cleaning or if cable is cut,

damaged or entangled.

F016 L70 372 - GB Seite 2 Donnerstag, 6. Oktober 2005 9:35 09

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch Aquatak 115 Plus Comfort Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info