Bedienungsanleitung Bosch Aquatak Go Plus (Seite 19 von 119) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

78579

Zoom out

Zoom in

Vorherige Seite

1/119

Nächste Seite

English | 19

Bosch Power Tools F016 L70 529 | (7.2.08)

Your machine is double insulated for safety and

requires no earth connection. The operating

voltage is 230 V AC, 50 Hz (for non-EU countries

220 V, 240 V as applicable). Only use approved

extension cables. Contact your Bosch Service

Centre for details.

If you want to use an extension cable when op-

erating your high pressure washer, only the fol-

lowing cable dimensions should be used:

- 1,5 mm

– max length 20 m

- 2,5 mm

– max length 50 m

Note: If an extension cable is used it must be

earthed and connected through the plug to the

earth cable of your supply network in accord-

ance with prescribed safety regulations.

If in doubt contact a qualified electrician or the

nearest Bosch Service Centre

WARNING! Inadequate extension cables can be

dangerous. Extension cable, plug and socket

must be of watertight construction and intend-

ed for outdoor use.

Cable connections should be kept dry and off

ground.

It is recommended for increased electrical safe-

ty to use a Residual Current Device (RCD) with

a tripping current of not more than 30 mA. Al-

ways check your RCD every time you use it.

If the supply cord is damaged, it must be re-

placed by a Bosch Service Centre.

Products sold in GB only: Your product is fitted

with an approved 13 A (BS 1363/A) electric plug

and is protected by a 13 A fuse (ASTA Approved

to BS 1362).

If the fitted plug is not suitable for your socket

outlets, it should be cut off and an appropriate

plug fitted in its place.

The severed plug must be disposed of to avoid a

possible shock hazard and should never be in-

serted into a 13 A socket elsewhere.

Assembly

Connect pressure washer to trolley

Push the four supplied wheels onto the trolley.

Fit the pressure washer to the trolley as shown,

to remove lift the clip 11.

Assembly of roto-nozzle and tube

Insert the roto-nozzle 7 into the tube 8 .

Connecting high pressure water

supply hose/nozzle

Insert the jet fan power lance 1 into power gun

2. Depress and turn the jet fan power lance 90°

clockwise to lock in place.

Securely screw high pressure hose 6 onto ma-

chine at connection 17.

Connecting high pressure to gun

Join high pressure hose to gun as shown.

Secure with clip 15 as shown, check if secure by

pulling on high pressure hose.

Water connection

Screw inlet connector 12 onto machine water

inlet connection 16.

Attach water supply hose (not supplied) to the

mains water supply and machine.

Using different nozzles

Roto power lance (depending on model)

Turn the jet-fan power lance 1 90° anti-clock-

wise. Extract the jet-fan power lance.

Insert the roto-power assembly into the power

gun 2. Depress and turn the roto-power lance

90° clockwise to lock in place.

Detergent nozzle and bottle

Turn the jet-fan power lance 1 90° anti-clock-

wise. Extract the jet-fan power lance.

Insert the detergent-bottle 10 into the power

gun 2. Depress and turn the detergent-nozzle

90° clockwise to lock in place.

OBJ_BUCH-683-001.book Page 19 Thursday, February 7, 2008 4:29 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch Aquatak Go Plus Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch Aquatak Go Plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info