Bedienungsanleitung Bosch ART 23 EASYTRIM ACCU (Seite 23 von 179) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

537954

Zoom out

Zoom in

Vorherige Seite

1/179

Nächste Seite

English - 4

Remove stones, loose pieces of wood and

other objects from the cutting area.

The blade continues to rotate for a few seconds

after the trimmer is switched off. Allow the mo-

tor/blade to stop rotating before switching “on”

again.

Do not rapidly switch off and on.

Switching On and Off

Press switch 1 and hold depressed. Release

switch 1 for switching off.

Cutting Grass

Move the trimmer left and right, keeping it well away

from the body.

The trimmer can efficiently cut grass up to a height

of 15 cm. Cut taller grass in stages.

Cutting Around Trees and Bushes

Carefully cut around trees and bushes so that they

do not come into contact with the cutting line.

Plants can die if you damage the bark.

Battery duration

Battery duration is dependent on the working condi-

tions:

light conditions:

up to 500 metres

medium conditions:

up to 300 metres

tough conditions:

up to 50 metres

Before any work on the machine itself, re-

move battery from machine.

Note: To ensure long and reliable service, carry out

the following maintenance regularly.

Regularly check for obvious defects such as loose

fixings, and worn or damaged components.

Check that covers and guards are undamaged and

correctly fitted. Carry out necessary maintenance or

repairs before using.

If the trimmer should happen to fail despite the care

taken in manufacture and testing, repair should be

carried out by an authorized customer service agent

for Bosch garden products.

For all correspondence and spare parts orders, al-

ways include the 10-digit part number (TYP) from

the nameplate of the machine!

Before any work on the machine itself, re-

move battery from machine.

To remove the worn blade 16 push in direction of the

arrow until it snaps off the pivot 17.

Clean the pivot 17 of any residual plastic/debris with

a sharp knife.

To refit the new blade 16 place the eyelet over the

pivot 17 and pull outwards until it snaps into place.

Note: Only use Bosch replacement blades. They

have been developed specially for improved cutting

performance. The use of other cutter blades will lead

to a deterioration in performance and possible dam-

age to the product.

Stop and remove battery from product. En-

sure battery is removed before storage.

Clean the exterior of the machine thoroughly using a

soft brush and cloth. Do not use water, solvents or

polishes. Remove all grass and debris, especially

from the ventilation slots 7.

Turn the machine on its side and clean the cutting

guard 8 inside. If grass cuttings are compacted, re-

move with a wooden or plastic implement.

Battery should be stored between 0 °C –45 °C; in-

correct storage could result in the battery being

damaged.

Cutting and Edging

Maintenance

Blade Maintenance

After Trimming/Storage

F016 L70 456.book Seite 4 Dienstag, 20. Januar 2009 9:35 09

15 • F 016 L70 456 • TMS • 11.11.08

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch ART 23 EASYTRIM ACCU Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info