Bedienungsanleitung Bosch ART 26 ACCUTRIM (Seite 25 von 209) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

537951

Zoom out

Zoom in

Vorherige Seite

1/209

Nächste Seite

English - 3

1 On/Off switch

2 Handle

3 Handle wing nut

4 Adjustable handle

5 Adjusting collar

6 Shaft

7 Ventilation slots

8 Trimmer head

9 Plant protector (ART 26/2600 ACCUTRIM only)

10 Cutting guard

11 Wheels (ART 26/2600 ACCUTRIM only)

12 Foot pedal for head angle adjustment

13 Rechargeable battery

14 LED indicator

15 Battery charger

16 Charging compartment

17 Serial Number

Not all of the accessories illustrated or described are

included as standard delivery.

Charging Procedure

The charging procedure starts as soon as the mains

plug is plugged into the socket and the battery 13 is

inserted into the charging compartment 16.

Due to the intelligent charging method, the charging

condition of the battery is automatically detected and

the battery is charged depending on battery temper-

ature and voltage.

This gives longer life to the battery and always

leaves it fully charged when kept in the charger for

storage.

Control of the charging procedure is indicated via

the charge control LED 14:

Rapid-charging Procedure

The rapid-charging procedure is in-

dicated by flashing of the charge

control LED 14.

The battery is fully charged as soon as the LED 14

switches from flashing to being lit continuously. Af-

terwards the battery can be removed for immediate

use.

It is recommended not to remove the battery until the

battery is fully charged.

☞

The rapid-charging procedure is possible only

when the temperature of the battery is be-

tween 0 °C and 45 °C.

Trickle-charging Procedure

The trickle-charging procedure is in-

dicated by continuous lighting of

the LED 14.

With the battery fully charged, the charger immedi-

ately switches to trickle-charge mode. This equal-

izes the natural running-down of the battery again.

Charging Advice

With continuous or several repetitive charging cy-

cles without interruption, the charger can warm up.

This is not harmful and does not indicate a technical

defect of the unit.

A battery 13 that is new or has not been used for a

longer period does not develop its full capacity until

after approximately 5 charging/discharging cycles.

Leave such batteries 13 in the charging compart-

ment 16 until they have clearly warmed up.

A significantly reduced working period after charging

indicates that the batteries are worn out and must be

replaced.

Do not connect the battery before product

is completely assembled.

Ensure product is assemble in the following or-

der:

Mounting the Cutting Guard

Place the cutting guard 10 on the trimmer head 8.

➊ Hook the guard onto trimmer head and push until

secure fitting.

➋ Push rear of guard until secure (click).

Operating Controls

For Your Safety

Warning! Switch off, remove battery from ma-

chine before adjusting or cleaning.

The blade continues to rotate for a few sec-

onds after the trimmer is switched off.

Caution – do not touch rotating blade.

Assembly

F 016 L70 348.book Seite 3 Mittwoch, 21. Januar 2009 4:24 16

17 • F 016 L70 444 • TMS • 13.11.08

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch ART 26 ACCUTRIM Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info