Bedienungsanleitung Bosch AXT RAPID 180 (Seite 15 von 85) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

1139

Zoom out

Zoom in

Vorherige Seite

1/85

Nächste Seite

English - 4

Branches become harder to shred depending on the

type, age and dryness of the wood.

For best results, shred fresh branches soon after

they have been cut.

The use of the prodder 13 will help with the feeding

of soft material.

Soft garden waste should be shredded in smaller

loads, particularly when wet.

Any blockages can be avoided by intermittently

shredding branches.

Stop and remove plug from the power sup-

ply.

Note: To ensure long and reliable service, carry out

the following maintenance regularly.

Regularly check for obvious defects such as loose,

dislodged or damaged blade, loose fixings, and

worn or damaged components.

Check that covers and guards are undamaged and

correctly fitted. Carry out necessary maintenance or

repairs before using.

If the machine should fail despite the rigorous man-

ufacturing and testing procedures, repair should be

carried out by an authorised customer service centre

for Bosch power tools.

For all correspondence and spare parts orders, al-

ways include the 10-digit part number (TYP) from

the nameplate of the machine!

Stop and remove plug from the power sup-

ply.

The blade has a double sided cutting edge.

When the cutting edges become blunt, the blade can

be turned over. When both sides are blunt replace

the blade.

Use the following procedure to remove, turnover or

replace the blade:

➊ Unscrew securing knob 3.

➋ Remove cover 11 as shown in fig. .

Wearing a pair of garden gloves (not supplied) turn

the blade 13 so that it aligns with the markings on

the reaction plate 17.

➌ Insert a screw driver into the hole 14 to lock the

drive.

➍ Use the allen key 12 to remove the blade bolt 16,

and the blade washer 15.

➎ Remove the blade 13 by lifting and sliding down-

wards as shown in fig.

Fit the blade, blade washer and the blade bolt.

Only use a Bosch approved blade bolt.

Tighten the bolt firmly (tightening torque 12 Nm).

Ensure that the allen key 12 and screw driver are re-

moved, also ensure that the cover 11 and securing

knob 3 are fitted before attempting to turn the ma-

chine on.

Blade.................................................F 016 800 164

Collection bag ...................................2 605 411 073

Gloves...............................................2 607 000 134

Protective goggles.............................2 607 990 041

Lubricant spray..................................1 609 200 399

Stop and remove plug from the power sup-

ply.

Clean the exterior of the machine thoroughly using a

soft brush and cloth. Do not use water, solvents or

polishes. Remove all debris, especially from the

ventilation slots 5.

Store the machine in a dry place. Do not place other

objects on top of the machine.

For additional security the switch can be padlocked

(padlock not supplied) as shown in fig. .

Advice on Shredding

Maintenance

Blade Maintenance

Accessories

After Shredding/Storage

F 016 L70 340.book Seite 4 Dienstag, 25. Oktober 2005 9:36 09

15 • F 016 L70 340 • TMS • 20.10.05

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch AXT RAPID 180 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info