Bedienungsanleitung Bosch BCH62562GB (Seite 42 von 106) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

776821

Zoom out

Zoom in

Vorherige Seite

1/106

Nächste Seite

Fig. 15 Sensor Control

The indicator lights up blue or is off when the appli-

ance is working at its optimum level. Once the indica-

tor turns red and ﬂashes, the outer ﬁlter unit and ﬁlter

cartridge must be cleaned.

The appliance is automatically adjusted to power level

Fig. 16 Cleaning the outer ﬁlter unit

The outer ﬁlter unit should be cleaned at regular in-

tervals in order to ensure optimum operation of the

vacuum cleaner.

Please switch off the appliance to clean the outer

ﬁlter unit.

Remove the dust container from the appliance.

Fig. 12

Take the ﬁlter unit out of the dust container. Fig. 13

Clean the outer ﬁlter unit.

a) It is usually sufﬁcient to lightly shake or tap out the

whole ﬁlter unit when the dust container is emptied in

order to dislodge any particles of dirt.

b) If this is not sufﬁcient, you can use a dry cloth to remo-

ve dirt particles from the surface.

Fig. 17 Cleaning the ﬁlter cartridge

Switch off the appliance.

Remove the dust container from the appliance.

Fig. 12

Take the ﬁlter unit out of the dust container. Fig. 13

a) Turn the ﬁlter cartridge lid anti-clockwise and remove

the ﬁlter cartridge from the ﬁlter unit.

b) Firstly, clean the ﬁlter cartridge by tapping out the dirt.

c) Pull out the foam ﬁlter from the motor protection and

rinse separately.

Allow the foam ﬁlter and motor protection ﬁlter to

dry completely (approx. 24 hours)

d) After ﬁtting the foam ﬁlter, insert the ﬁlter cartridge

into the dust container.

e) Insert the ﬁlter cartridge into the ﬁlter unit and lock it

by turning the lid clockwise.

If, after hand-washing the ﬁlter cartridge, the "Sensor

Control" indicator ﬂashes red again, the ﬁlter cartridge

is so heavily soiled that it must be washed in a washing

machine. Use a gentle programme at max. 30 °C and

the lowest spin speed.

New ﬁlters can be obtained from our after-sales ser-

vice, if required.

Cleaning the ﬂoor tool

Before carrying out any maintenance, switch off the

vacuum cleaner and disconnect it from the charging

cable.

Fig. 18

a) Release the brush roller using the release button and

pull it sideways out of the ﬂoor tool.

b) Using the groove provided, cut through threads and

hairs wound round the rollers with scissors and then

remove them.

c) Push the brush roller in sideways along the guide rod in

the ﬂoor tool and lock in place using the release button.

Caution: The ﬂoor tool must only be put into operati-

on with the brush roller ﬁtted.

Care

Before cleaning the hand vacuum cleaner, it must

be switched off and disconnected from the charging

cable. The vacuum cleaner and plastic accessories can

be cleaned with an ordinary plastic cleaner.

! Caution: Do not use abrasive materials, glass-

cleaning agents or all-purpose cleaning products.

Never immerse the vacuum cleaner in water.

Subject to technical modiﬁcations.

* Depending on model

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch BCH62562GB Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info