Bedienungsanleitung Bosch BDU250P CX Performance Line 2017 (Seite 10 von 56) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

780236

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

English–3

0 275 007 PDC | (10.5.17) Bosch eBike Systems

As soon as you stop pedaling when in normal operation, or as

soon as you have reached a speed of 25 km/h, the assistance

from the eBike drive is switched off. The drive is automatically

re-activated as soon you start pedaling again and the speed is

below 25 km/h.

Options for switching off the eBike system:

– Press the On/Off button of the on-board computer.

– Switch off the eBike battery using its On/Off button

(bicycle manufacturer-specific solutions are possible

whereby there is no access to the battery On/Off button;

see the bicycle manufacturer operating instructions).

– Remove the on-board computer out of its holder.

If the eBike is not moved and no button is pressed on the on-

board computer for 10 minutes, the eBike system will shut

down automatically in order to save energy.

eShift (optional)

eShift is the integration of electronic gear shifting systems

into the eBike system. The eShift components are electrically

connected to the drive unit by the manufacturer. The separate

operating instructions describe how to operate the electronic

gear-shifting systems.

Setting the Assistance Level

On the on-board computer you can set how much the eBike

drive assists you while pedalling. The assistance level can be

changed at any time, even while cycling.

Note: For individual versions, it is possible that the assistance

level is pre-set and cannot be changed. It is also possible that

less assistance levels are available for selection than listed

here.

When the eBike is configured in “eMTB Mode” by the manu-

facturer, the assistance factor and torque are dynamically

adjusted as a function of the force you exert on the pedals.

“eMTB Mode” is only available for Performance Line CX

drives.

The following assistance levels (max.) are available:

–“OFF”: The motor assistance is switched off, and the eBike

can be moved as a normal bicycle only by pedalling. The

push assistance/start assistance cannot be activated in

this assistance level.

–“ECO”: Effective assistance at maximum efficiency for

maximum cruising range

–“TOUR”: Uniform assistance, for touring with long cruising

range

–“SPORT”/“eMTB”

“SPORT”: Powerful assistance for sportive riding off road

as well as for urban traffic

“eMTB”: Optimal assistance whatever the terrain, rapid

acceleration when starting from a standstill, improved

dynamics and top performance.

–“TURBO”: Maximum assistance, supporting highest

cadence for sportive riding

The motor output requested appears on the display of the on-

board computer (not on Purion). The maximum motor output

depends on the selected assistance level.

Switching the Push-assistance mode On/Off

The push-assistance feature makes it easier to push the

eBike. The speed in this function depends on the set gear and

cannot exceed 6 km/h (max.). The lower the set gear, the low-

er the speed in the push-assistance function (at full output).

The push-assistance function may only be used when

pushing the eBike. Danger of injury when the wheels of

the eBike do not have ground contact while using the push-

assistance function.

To activate the push-assistance function, briefly press

button “WALK” on your on-board computer. After activation,

press button “+” within 3 s and keep it pressed. The eBike

drive is switched on.

Note: The push assistance cannot be activated in the “OFF”

assistance level.

The push assistance is switched off as soon as one of the

following occurs:

– You release the “+” button;

– The wheels of the eBike are prevented from turning (e.g.

by braking or being hit by your leg);

– The speed exceeds 6 km/h.

Note: On some systems the push-assistance function can be

started directly by pressing the “WALK” button.

Switching bike lights on/off

In the version which has the bike lights powered by the eBike

system, the front and rear lights can be switched on and off at

the same time via the on-board computer.

Notes on Riding with the eBike System

When does the eBike Drive Unit Operate?

The eBike drive unit assists you when riding, as long as you

step into the pedals. Without pedaling, there is no assistance.

The motor output always depends on the amount of your

pedaling power.

When applying less pedaling power, the assistance or support

will be lower than when applying a lot of pedaling power. This

applies independent of the assistance Level.

Assistance Level Assistance Factor1)

(Derailleur)

Cruise CX

“ECO” 50% 50%

“TOUR” 120% 120%

“SPORT”/“eMTB” 190% 210 %...300 %2)

“TURBO” 275% 300%

1) The assistance factor may vary on the individual versions.

2) Maximum value

OBJ_BUCH-2821-002.book Page 3 Wednesday, May 10, 2017 11:03 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch BDU250P CX Performance Line 2017 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info