Bedienungsanleitung Bosch BGL8PET1 (Seite 41 von 120) (Alle Sprachen)

561209

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

Cleaning the foam ﬁlter

If your appliance is ﬁtted with a ﬁlter frame and foam

ﬁlter, the foam ﬁlter should be cleaned at regular inter-

vals by tapping out the dust.

Fig.

20*

•

Open the dust bag compartment lid. Fig.

•

Pull out the ﬁlter frame and foam ﬁlter in the direc-

tion of the arrow.

•

Remove the foam ﬁlter from the ﬁlter frame and

clean it by tapping out the dust.

•

After cleaning, place the foam ﬁlter back in the ﬁlter

frame, insert the ﬁlter frame with foam ﬁlter in the

appliance and close the dust bag compartment lid.

Caution: The vacuum cleaner must not be operated

without the motor protection ﬁlter.

Exhaust ﬁlter

The exhaust ﬁlter must be cleaned or replaced at least

once a year.

Replacing the micro-hygiene exhaust ﬁlter

Fig.

21*

•

Open the rear ﬂap.

•

Unlock the ﬁlter holder by moving the locking tab in

the direction of the arrow.

•

Remove the foam ﬁlter* from the ﬁlter holder and

tap it out.

Replace the old micro-hygiene ﬁlter with a new one.

(This is included in the ﬁlter pack when you purchase

original dust bags).

Insert the foam ﬁlter into the ﬁlter holder.

•

Insert the ﬁlter holder into the appliance and lock it

in place.

Cleaning the (H)EPA* exhaust ﬁlter

The (H)EPA* ﬁlter is designed so that it does not need

to be replaced, provided the appliance is used as inten-

ded in the household.

To ensure that the vacuum cleaner is working at its op-

timum power level, the (H)EPA* ﬁlter should be rinsed

out after one year. The ﬁltering action of the ﬁlter re-

mains intact, even if the ﬁlter surface becomes disco-

loured.

Fig.

22*

•

Open the rear ﬂap.

•

Unlock the (H)EPA* ﬁlter by moving the locking tab

in the direction of the arrow, and remove it from the

appliance.

•

Tap out the ﬁlter unit and rinse it under running wa-

ter.

Alternatively, the unit can be cleaned in a washing

machine at max. 30 °C using a gentle programme and

the lowest spin speed.

TIP: To protect other laundry items, put the ﬁlter

unit into a laundry bag.

•

Once the (H)EPA* ﬁlter has dried completely (at

least 24 hours), insert it back into the appliance and

lock it in place.

•

Close the rear ﬂap.

After vacuuming ﬁne dust particles (e.g. gypsum, ce-

ment, etc.), clean the motor protection ﬁlter by tapping

it out or, if necessary, replace the motor protection ﬁl-

ter and exhaust ﬁlter.

Care

Always switch off the vacuum cleaner and disconnect

the power cord from the mains before cleaning the va-

cuum cleaner. The vacuum cleaner and plastic acces-

sories can be cleaned with an ordinary plastic cleaner.

Do not use abrasive materials, glass-cleaning agents

or all-purpose cleaning products. Never immerse the

vacuum cleaner in water.

The dust compartment can, if necessary, be cleaned

with a second vacuum cleaner or simply wiped with a

dry cloth or dusting brush.

Subject to technical modiﬁcations.

* Depending on model

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch BGL8PET1 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info