Bedienungsanleitung Bosch BGS7PET (Seite 26 von 64) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

765477

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Description of the appliance

1 Nozzle holder with accessory connection*

2 Nozzle holder without accessory connection*

3 Carpet button*

4 SelfClean button

5 Inspection window with turbine system

6 Brush roller release button

7 Brush roller guide rod

8 Brush roller

Starting up for the ﬁrst time

Fig. 1*

a) Nozzle without accessory connection:

Place the Turbo brush on the suction pipe. To re-

lease the connection, turn the pipe slightly and pull

it out of the Turbo brush holder.

b) Nozzle with accessory connection:

Slide the telescopic pipe until it clicks into place

in the holder for the Turbo brush. To release the

connection, push the release collar and pull out the

telescopic pipe.

Vacuum brushing

! Please note:

Only vacuum brush at full suction power, i.e. max.

power setting on the vacuum cleaner.

Cleaning carpets/carpeted ﬂoors

When cleaning carpets, the brush roller starts auto-

matically three seconds after the vacuum cleaner is

switched on.

When cleaning carpets, the turbine system works wi-

thout any braking. This creates the maximum suction

power for the nozzle.

Cleaning hard ﬂoors

The turbine system detects the type of ﬂooring. When

changing from carpeted ﬂoors to hard ﬂoor, the tur-

bine system starts to brake down the rotation speed

and therefore reduces the noise level.

If you change ﬂooring from hard ﬂoor to carpet the

turbine system doesn’t brake anymore and have again

the maximum suction power.

Fig 2* Carpet button*

Press the Carpet button when vacuuming long-pile

carpets.

This reduce a force of pushing nozzle and speed up

brush roller.

! Please note:

The Carpet button can be pressed when cleaning

all types of ﬂooring.

Fig. 3 SelfClean button

Press and hold the SeﬂClean button when nozzle

is on the hard ﬂoor to order to use the maximum

airﬂow and the minimum resistance for the brush

roller.

The best results of cleaning brush roller are with

using function 3 times per 5 seconds. If it necessa-

ry please hold the button longer

! Please note:

We recommend using the SelfClean function after

using the Turbo brush.

Maintenance

Before carrying out any maintenance work, switch

off the vacuum cleaner and pull out the mains plug.

Remove the Turbo brush from the suction/telescopic

pipe.

Fig. 4

Use the release button to release the brush roller

and pull it sideways out of the Turbo brush.

Fig. 5

 Remove the dirt.

When hairs gets stuck between the brush roller re-

lease button and the brush roller you can separate

them by pulling on the release button with some

force. Then you can clean the axis and put the parts

back together.

Fig. 6

 Push the brush roller in sideways along the guide

rod and into the Turbo brush, and lock it in place

using the release button.

! Caution:

The Turbo brush must only be used with the brush

roller ﬁtted.

Subject to technical modiﬁcations.

*depending on model

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch BGS7PET Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info