Bedienungsanleitung Bosch BSG 82000 (Seite 12 von 138) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

73280

Zoom out

Zoom in

Vorherige Seite

1/138

Nächste Seite

Fold out picture pages.

Setting up

Figure

a) Insert the flexible hose adapter into the air intake open-

ing and allow it to engage.

b) To remove the flexible hose, press the two lugs together

and pull the tube out.

Figure

a) Align and connect the handle and the telescopic tube.

b) Push the handle straight into the telescopic tube until it

engages.

To release the connection, squeeze the collar sleeve and

pull the handle out.

Figure

Push the telescopic tube straight into the

connecting piece of the floor tool until it engages.

To release the connection, squeeze the locking collar

and pull the telescopic tube out.

Figure

Press the adjusting sleeve in the direction of the arrow

and adjust the telescopic tube to the length required.

Figure

Holding the power cord by the plug, pull out the required

length and plug the plug into the mains socket.

Figure

To switch your vacuum cleaner on and off, press the On/Off

button in the direction of the arrow.

Vacuuming

You have bought an extremely powerful device. The high-

est suction setting is therefore only recommended for

heavily soiled, short-pile carpets and hard floors.

Figure

The required suction power can be selected by adjusting the

suction regulator.

Ⅲ

Low

suction range:

For vacuuming delicate fabrics, e.g. curtains.

Ⅲ

Moderate

suction range:

For daily vacuuming of lightly soiled floors.

Ⅲ

High

suction range:

For vacuuming durable floor coverings, hard floors and

for heavily soiled surfaces.

Ⅲ

Turbo range:

For vacuuming stubborn dirt and very heavily soiled sur-

faces.

Figure

Adjusting the floor tool:

a) For vacuuming rugs and carpets =>

b) For vacuuming hard floors =>

Vacuuming with accessories

Figure

Pull the 4 in 1 tool in the direction of the arrow to remove it

from the tool holder.

a) Crevice nozzle

For vacuuming in crevices and corners.

For difficult to reach places, the 4 in 1 tool can be

extended to two different lengths by pulling out the

crevice nozzle.

Ⅲ

For either length extension, pull the crevice nozzle out

until you hear it engage.

Ⅲ

The crevice nozzle can be pushed back in again by

releasing the telescopic locking mechanism (pressing it

in the direction of the arrow).

b) Upholstery nozzle

For cleaning upholstered furniture,

curtains, etc.

c) Hard furnishings brush

For window frames, cabinets, profiles etc.

Ⅲ

Fold the upholstery nozzle over in the direction of the

arrow.

Ⅲ

To extend the brush ring, turn in the direction of the

arrow.

Before replacing the 4 in 1 tool in the tool holder,

retract the brush ring and fold the upholstery nozzle

back.

Innenteil 358 918 A 19.03.2008 8:07 Uhr Seite 10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch BSG 82000 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info