Bedienungsanleitung Bosch BX 32100 (Seite 18 von 157) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

75625

Zoom out

Zoom in

Vorherige Seite

1/157

Nächste Seite

Figure

Press the on/off button in the direction of the

arrow to switch your vacuum cleaner on/off.

Figure

Adjust the suction by turning the on/off

button in the direction of the arrow.

Set the power setting to maximum for the

best results when vacuuming. We

recommend that you reduce the setting only

when vacuuming very delicate materials.

Vacuuming

Figure

Adjust the adjustable floor tool:

Ⅲ

Rugs and carpets =>

Ⅲ

Hard/parquet floors =>

Figure

Adjust the "autofloor" floor tool:

Ⅲ

Hard floor setting =>

Fixed position for vacuuming hard/parquet

floors

Ⅲ

Automatic setting => auto

The floor tool adjusts automatically to the

floor covering and switches from

hard/parquet floors to carpeted floors

Ⅲ

Carpet setting =>

Fixed position for vacuuming rugs and

carpets

If you are vacuuming varying types of floor

coverings (hard floors <-> carpets), we

recommend that you use the automatic

setting so that the floor tool adjusts

automatically to the floor and you do not

need to switch over the nozzle setting.

Figure

To clean the "autofloor" tool, switch it to the

hard floor setting and simply vacuum it using the

fixed / telescopic tube.

Figure

Remove the upholstery nozzle and crevice noz-

zle from the accessories holder as illustrated.

11*

10*

Figure Vacuuming with accessories

Attach the nozzles to the tube or handle as

required:

a) Crevice nozzle for vacuuming crevices and

corners, etc.

b) Upholstery nozzle for vacuuming upholstered

furniture, curtains, etc.

After use, push the crevice nozzle and

upholstery nozzle back into the accessories

holder as indicated. (see Figure 2)

c) Hard furnishings brush

For cleaning window frames, cabinets,

mouldings, etc.

d) Hard-floor brush

For vacuuming hard floor coverings (tiles,

parquet flooring, etc.)

Figure

Pet hair tool

Floor tool for easy, thorough removal of pet

hair

To clean the nozzle, simply vacuum it using

the fixed / telescopic tube

Figure

Once you have switched off the vacuum

cleaner, slide the catch on the floor too into

the groove at the rear of the appliance.

Once you have switched off the vacuum

cleaner, slide the catch on the floor tool into

the groove on the rear of the appliance.

Attention: Do not operate in an

upright/vertical position.

Figure

The appliance can also be carried using the car-

rying handle when vacuuming steps, for example.

When the work is done

Figure

Unplug the vacuum cleaner.

Tug the power cord briefly and let go. The

cable then rewinds automatically.

Figure

Unlock the telescopic tube by moving the

sliding button in the direction of the arrow

and slide one tube into the other.

14*

Depending on equipment

Innenteil 161 767 C 03.07.2006 14:06 Uhr Seite 12

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch BX 32100 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info