Bedienungsanleitung Bosch BX 32132 (Seite 20 von 157) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

76186

Zoom out

Zoom in

Vorherige Seite

1/157

Nächste Seite

Replacing the micro active carbon filter

Figure

Ⅲ

Unlatch the twin cylinders and open them

forwards. (See fig. 20)

Ⅲ

Unlatch the dust container and remove it from

the appliance (see fig. 21)

Ⅲ

Open the exhaust filter cover as far as possi-

ble in the direction of the arrow. The cover

engages in this position. (See fig. 24)

Ⅲ

Remove and dispose of the micro active

carbon filter.

Ⅲ

Fit a new filter (BBZ192MAF )

Ⅲ

Close the exhaust filter cover.

Insert the dust container into the appliance

until it engages (you will hear a positive click).

Push the twin cylinders back into position

(effectively closing the vacuum cleaner),

making sure that they engage (you will here a

positive click). (See fig. 23)

Replacing the HEPA filter

Figure

Ⅲ

Unlatch the twin cylinders and open them

forwards. (See fig. 20)

Ⅲ

Unlatch the dust container and remove it

from the appliance (see fig. 21).

Ⅲ

Open the exhaust filter cover as far as

possible in the direction of the arrow. The

cover engages in this position (see fig. 24).

Ⅲ

Remove and dispose of the HEPA filter.

Ⅲ

Fit a new filter (BBZ153HFB ).

Ⅲ

Close the exhaust filter cover.

Insert the dust container into the appliance

until it engages (you will hear a positive click).

Push the twin cylinders back into position

(effectively closing the vacuum cleaner),

making sure that they engage (you will here

a positive click) (see fig. 23).

Cleaning the twin cylinders

Figure

Ⅲ

Use the release button (1) to unlatch the twin

cylinders and open them forwards (see fig. 20).

Ⅲ

Turn the cylinder cover as shown to remove

from the appliance.

Ⅲ

Clean the cylinder and cover.

Figure

Ⅲ

Replace the cylinder cover and lock it into

place by turning in the direction of the arrow

(please make sure that you replace the one

marked with an "L" on the left hand side and

the one marked with an "R" on the right hand

side).

Ⅲ

Push the twin cylinders back into position

(effectively closing the vacuum cleaner),

making sure that they engage (you will here a

positive click) (see fig. 23).

Attention: The inside of the twin cylinders

may become scratched with use and start

to look opaque.This does not, however,

affect the performance of the vacuum

cleaner in any way, i.e. it will continue to

function as normal.

Care

Always switch off the vacuum cleaner and dis-

connect the power cord from the mains before

cleaning the appliance. The vacuum cleaner and

plastic accessories can be cleaned with a com-

mercial plastic cleaner.

Do not use a scourer, glass-cleaning agent

or all-purpose cleaning product. Never

immerse the vacuum cleaner in water.

The dust compartment can, if necessary, be

cleaned with a second vacuum cleaner or simply

wiped with a dry cloth or dusting brush.

Subject to technical modifications.

Innenteil 161 767 C 03.07.2006 14:06 Uhr Seite 14

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch BX 32132 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info