Bedienungsanleitung Bosch CMA583MS0 (Seite 15 von 68) (Englisch)

672135

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Microwave en

Setting the microwave

Example: Microwave setting 600 W, cooking time

5 minutes.

1. Use the function selector to select the microwave

function !.

The appliance is now ready to use. The maximum

microwave power output ! will be displayed as the

default value on the display. You can change this at

any time.

2. Touch the microwave setting field to select the

power setting you require.

The microwave setting will be highlighted and a

default cooking time will be shown on the display.

3. Use the rotary selector to set the required cooking

time.

Note: You can also set the cooking time first and

then the microwave setting.

4. Touch the start l stop button.

The time remaining will count down on the display.

The start l stop LED will be lit.

The cooking time has elapsed

An audible signal sounds. Open the appliance door or

touch any field.

Changing the cooking time

Use the rotary selector to change the cooking time.

After a few seconds, the change is applied.

Changing the microwave power output

Touch ! until the required level is selected in the

display.

Notes

■Touching it several times switches the power levels

from the highest to the lowest level.

■If the microwave function is only added after the

start, the appliance pauses. Press start l stop to

start operation

Pausing the operation

1. Touch the start l stop field or open the appliance

door.

The operation is suspended and the

start l stop LED flashes.

2. Close the appliance door.

3. Touch the start l stop field.

The operation is continued and the start l stop LED

lights up.

Stopping the appliance from heating

Turn the function selector to the "Off" position.

The appliance will stop heating and all the settings will

be cleared.

Note: The fan may continue to run after the appliance

has been paused or stopped.

Setting the microwave to combined

operation

Se t t i n g the microwave to combi ned oper at i on

You can combine the microwave function with all types

of heating. The appliance heats up and the microwave

is switched on at the same time. As a result, the food is

ready in a much shorter time.

Combination options

■< Hot air

■7 Hot air grill

■2 Pizza setting

■( Grill

Exceptions:

! Microwave setting 900 W

< Hot air 40 °C

Setting combined operation

Example: Hot air < 190 ºC with microwave at 360 W,

17 minutes.

1. Use the function selector to set the Hot air <

function.

A default value for the temperature is displayed.

2. Turn the rotary selector to set the desired

temperature.

3. Touch the microwave power output field ! until the

required level is selected in the display.

A default cooking time appears.

4. Set the cooking time using the rotary selector.

5. Touch start l stop.

The operation starts and the start l stop LED lights

up. The cooking time starts counting down.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch CMA583MS0 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch CMA583MS0

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info