Bedienungsanleitung Bosch CMG676BS6B (Seite 29 von 56) (Englisch)

746199

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

en Rails

Inserting the holders

If the holders fall out when you remove the rails, these

must be re-inserted.

1. The holders at the front differ from those at the rear

(fig. !).

2. Use the hook to mount the front holder at the top

into the round hole ‚, set it at a slight incline, attach

it at the bottom, and straighten it ƒ (fig. ").

3. Use the hook to attach the rear holder into the upper

hole ‚ and push it into the lower hole ƒ (fig. #).

Attaching the rails

When hanging the rails, ensure that the sloping edge is

at the top of the rail.

The rails fit both the left and right sides.

1. Hold the rear of the frame at an angle, and mount it

at the top and bottom ‚ (fig. !).

2. Pull the rail forwards (fig. ").

3. Then fold it forwards and insert it (fig. #)

4. and push it downwards (fig. $).





Appliance door en

qAppliance door

Appl i ance door

With good care and cleaning, your appliance will retain

its appearance and remain fully functional for a long

time to come. This will tell you how to clean the

appliance door.

Removing the door cover

The stainless-steel inlay in the door cover may become

discoloured. To carry out thorough cleaning, you can

remove the cover.

1. Open the appliance door slightly.

2. Press on the right and left side of the cover (fig. !).

3. Remove the cover (fig. ").

Close the appliance door carefully

Note: Clean the stainless-steel inlay in the cover with

a stainless-steel cleaning agent. Clean the rest of the

door cover with soapy water and a soft cloth.

4. Open the appliance door again slightly. Put the

cover back in place and press on it until it clicks

audibly into place (fig. #).

5. Close the appliance door.

Removing and fitting the door panels

To facilitate cleaning, you can remove the glass panels

from the appliance door.

:Warning

Risk of injury!

■Scratched glass in the appliance door may develop

into a crack. Do not use a glass scraper, sharp or

abrasive cleaning aids or detergents.

Risk of injury!

■The hinges on the appliance door move when

opening and closing the door, and you may be

trapped. Keep your hands away from the hinges.

Risk of injury!

■Components inside the appliance door may have

sharp edges. Wear protective gloves.

Removing the door panels from the appliance

1. Open the appliance door slightly.

2. Press on the right and left side of the cover (fig. !).

3. Remove the cover (fig. ").

4. Undo and remove the screws on the left and right of

the appliance door (fig. #).

5. Before closing the door again, trap a tea towel that

has been folded several times in the door (fig. $).

Pull out the front panel upwards and lay it on a flat

surface with the door handle facing downwards.

6. Push both retainers at the top of the intermediate

panel upwards, but do not remove them (fig. %).

Hold the panel with one hand. Take out the panel.

Clean the panels with glass cleaner and a soft cloth.









Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch CMG676BS6B Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info